Description: WORLD WIDE with the eBay Global Shipping Program! FREE USA SHIPPING! NO RETURNS FOR ANY REASON! You are bidding or 'Buying-it-Now' a pair of NOS J-E forged pistons, including rings, pins and circlips for the Harley-Davidson 1,000 c.c. IronHead Sportster models as made from 1972 through 1985 which have been built as STROKERS, typically with 4&5/8" flywheels. The pistons measure 3.208" which is + .020" over standard bore size. THERE ARE NO RETURNS FOR ANY REASON. Compression Ratio; I've had several questions regarding the c/r. If you study the photo of the spec sheet, you'll notice the piston dome listed as .745" and the compression distance listed as .874", which is the distance from the piston pin centerline to the deck of the piston, (minus dome height). Though not stated and based on the large piston dome, it's likely the c/r is at least 10 to 1 considering the excess stroke. Buyer be aware as there are no returns for any reason. A reminder when fitting these forged pistons to the iron cylinders; You need to clearance, (hone), the cylinders to allow for .003" - .004" piston to wall clearance. I've witnessed too many trashed J-E forged pistons when guys try to fit them tighter. They do expand considerably in use! There are no returns for any reason. PLEASE KNOW WHAT YOU ARE BUYING AS THERE ARE NO RETURNS FOR ANY REASON! FEEDBACK; I post a buyers 'POSITIVE' feedback after the buyer first posts mine. Please study the photos, ask your questions and check your parts book as there are NO RETURNS FOR ANY REASON! USA shipping is FREE. Anywhere else on this planet please consult the eBay Global Shipping Program for fees. Thanks for looking and Good Luck with your bids and buys!
Price: 777.77 USD
Location: Absecon, New Jersey
End Time: 2024-12-19T00:05:06.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: J-E Pistons, USA
Non-Domestic Product: No
Country/Region of Manufacture: United States
Modified Item: No
