Nortek GoControl Z-Wave Plus Garage Door Controller, Gen5 (GD00Z-8-GC)

Description: The GoControl Z-Wave Plus Garage Door Controller, S2 Security adds Z-Wave remote control to most sectional garage door openers, allowing you to operate the opener through a Z-Wave controller, smartphone app, or an existing pushbutton. This new version of GoControl's garage door controllers features S2 encryption for more secure wireless communication and increased Z-Wave transmission range.Adds Z-Wave control to a connected garage door openerWorks with almost any sectional garage doorCan be included in Z-Wave automation scenes and schedulesIncluded tilt sensor detects door's open/closed statusCustomizable audio and visual alerts enhance safety The Z-Wave Plus Garage Door Controller can emit audio and visual alerts to warn people nearby when the garage door is about to open/close. The included tilt sensor also sends status updates to inform you when the garage door is closed, open, or moving.Installation Details The Z-Wave Plus Garage Door Controller wires to your garage door opener and can be used in conjunction with an existing pushbutton. It mounts near the garage door opener either on the existing opener hardware with the included bracket, or directly to the wall with the included mounting hardware. The controller is powered by the included power supply, which plugs into a standard outlet. The Garage Door Tilt Sensor mounts inside the top of your garage door using screws or double-sided tape. The sensor is powered by a pre-installed battery, and communicates wirelessly with the controller.Z-Wave Plus Certification Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.ContentsGarage Door Remote ControllerGarage Door Tilt SensorPower SupplyMounting Bracket and HardwareNotesNot compatible with garage door openers that use proprietary communications technology.Requires enrollment into a Z-Wave controller (sold separately).Technical DetailsManufacturer Part #: GD00Z-8-GCUPC: 093863144691Color: BlackPower: 120VAC, 50/60 HzSensor Frequency: 345 MHzZ-Wave Frequency: 908.42 MHzWireless Range: Up to 130 feet between the wireless controller and/or the closest Z-Wave receiver moduleScene: Command ClassDimensions:Controller: W x H x D (Inches): 6.94 x 1.38 x 5.0Tilt Sensor: W x H x D (Inches): 1.69 x 0.88 x 1.19Certifications: FCC, ETL, UL 325Compatibility Details The Garage Door Remote Controller is compatible with most sectional garage door openers manufactured after 1993. However, some models have been identified as being incompatible (listed below). Additionally, since 2013, some garage door opener manufacturers have incorporated custom features that utilize a proprietary technology for communication from the wall button to the motor. The GD00Z does not support these special interfaces. Operators that are incompatible with Linear's GD00Z Controller include:*Chamberlain MyQ Models: WD962KEV, KPEV, MLEV; WD832KEV; HD 930EV, 420EV; LW500EV; PD752D, KPVGenie Series III Models: PowerMax 1500; TriloG 1200, 1500; IntelliG 1000, 1200LiftMaster MyQ Models: 8355, 8360, 8500, 8550, 8557, 8587Craftsman AssureLink / MyQ Models: 3043, 30437 *This is not intended to be an exhaustive list.

Price: 128 USD

Location: San Diego, California

End Time: 2024-12-30T17:25:25.000Z

Shipping Cost: 0 USD