Nitrocellulose Paint Sherwood Green

Description: Sherwood green - 400ml sprayThis is a rather rare pigmented metallic paint, inspired by the 1957 Lincolns in "Vermont Green". It was used by FENDER between 1960 and 1965. Since it is not a very common Fender color, original guitars are very sought after by collectors.Colors for vintage-inspired guitarsAfter intensive work and thorough research by our laboratory and technical department, we have developed guitar paints that faithfully recreate the tones of old Fender and Gibson guitars for painting electric guitars. They are based on original patterns from the 50s and 60s. However, keep in mind that the colors of vintage guitars may have changed significantly over the years due to the aging of the nitrocellulose lacquer and changes in the brand's own colors. Therefore, two guitars finished in 1960 with Fender Card colors may look different from each other or compared to a more current guitar today.Nitrocellulose lacquer gloss aerosol sprayAt NitorLACK we have developed all our guitar paints as nitrocellulose spray, so you do not need professional painting equipment to paint your guitar. You can achieve a professional finish with our entire range of products, from coloured basecoats from our full range to nitrocellulose topcoats in gloss and matt.How much spray do I need to paint a guitar?This depends greatly on the type of wood and the amount of product applied for each layer, as well as the desired finish, mirror effect or "open pore". But in general, you should paint a guitar with a medium wood pore:- Neck of an electric guitar: 2 cans of nitrocellulose clear varnish (glossy or matt)- Electric guitar body: 1 can of nitrocellulose primer, 3 cans of nitrocellulose clear varnish (glossy or matt)- Classical or acoustic guitar: 1 can of colored nitrocellulose base coat, 4 or 5 cans of nitrocellulose clear coat (glossy or matt)- Ukulele: 2 cans of nitrocellulose varnish (glossy or matt)- If you want to apply any color between the base coat and the clear coat, you should add 1 or 2 cans of the desired guitar color.Tips for sprayingShake vigorously for 2 to 5 minutes before applying. It is recommended to apply the spray in thin layers and at the lowest possible humidity. Apply with an even movement and at a distance of about 20 cm. It is important to apply a coat of primer before applying the spray and to sand with 400 grit sandpaper to obtain a uniform surface before staining or finishing. Sand between coats and allow 12 to 24 hours to dry between coats. Apply in well-ventilated areas.Seen cheaper somewhere else? No problem - send us your price proposal!+++3 years warranty+++All our items come with a 30-day no-hassle return policy. Reason. Sheet music, reading material and software cannot be exchanged. The general terms and conditions of Zoundhouse GmbH & Co.KG apply.For the out-of-court settlement of consumer disputes, the European Union provides an online platform (ODR platform) athttps://ec.europa.eu/consumers/odrWhen purchasing multiple items from us:Add the items to your shopping cart and select Request total from buyer at the top right.If you intend to buy multiple items: Put them into your shopping cart and choose combined shipping(up right)on your checkout.After intensive work and thorough research by our laboratory and technical department, we have developed guitar paints that faithfully recreate the tones of old Fender and Gibson guitars for painting electric guitars. They are based on original patterns from the 50s and 60s. However, keep in mind that the colors of vintage guitars may have changed significantly over the years due to the aging of the nitrocellulose lacquer and changes in the brand's own colors. Therefore, two guitars finished in 1960 with Fender Card colors may look different from each other or compared to a more current guitar today. Shake vigorously for 2 to 5 minutes before applying. It is recommended to apply the spray in thin layers and at the lowest possible humidity. Apply with an even movement and at a distance of aBREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice.From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).

Price: 37.55 USD

Location: Dresden

End Time: 2025-01-25T05:36:19.000Z

Shipping Cost: 104.62 USD