New Electric Drill Drive Self Priming Pump Water Oil Fluid Transfer Pumps Tools

Description: New Electric Drill Drive Self Priming Pump Water Oil Fluid Transfer Pumps ToolsFeatures: Electric Drill Water Pump: The pump is designed without a power supply. As long as you have an electric drill, you can pump water without a power supply. Stable Performance: Our hand electric drill pump is large in flow, stable in performance, high in efficiency, easy to install, simple to use, low in operating noise, what's more, the engineering ABS body makes the pump durable. Small Volume: The hand electric drill pump can be used by installing all drill chucks. It is small in size, light in weight, convenient and labor-saving, and easy to use. Easy to carry and store. Household Appliances: Self-priming water transfer pumps can adapt to any harsh environment with strong practicability. Suitable for homes, gardens, and outdoors. It is an ideal choice for transporting light liquids such as freshwater, seawater, oils, dilute organic solvents, pesticides, and liquid fertilizers. Specification: Type:drill water pump Material:Plastic Color:Black Pump Shank:Hex Shank Shank Dia:1/4" Inlet/Outlet Inner Dia:16mm Inlet/Outlet Outer Dia:19mm (suitable for 6 points) Flow Rate:120W-350W 1500-2500 20-30L/min; 350W-650W 2500-3500 30-40L/min Size :About 126 x 70 x 63mm / 4.96 x 2.76 x 2.48inch Package Included: 1 x Water Pump 2 x Hose Clip 2 x Screw 2 x Shelf Tips： 1.To achieve optimal start-up and extend service life, add a small amount of lubricating oil to the pump inlet before use, and rinse with clean water after each use. 2. Ensure that the inlet hose is sealed, as short as possible, and the hose should not exceed 9 feet (2.75 meters). 3. Working within the temperature range of 5 °~49 ℃ When pumping abrasive or liquid containing solids, using filters on the inlet pipeline can achieve longer pump life. 5. It is recommended to install the pump on the surface for safe use. 6. Install and start the drilling rig. Observe whether there is a certain amount of fluid sucked into the pump in the oil inlet pipe within 15-20 seconds. If not, check if the oil inlet pipe is correctly installed on the oil inlet pump and do not run it dry. If the pump fails to start, check if the hose is twisted or blocked. The pump depends on whether the fluid is being pumped for lubrication 7. It is recommended to rotate at 1500-3500 rpm. The head and flow rate are both related to the speed. The higher the speed, the higher the head, and the higher the flow Caution: Do not run the water pump in reverse Warning: When standing in water, do not operate the main process to drill into the ocean or let the power cord fall into the water. Always stand on a dry ground and keep all electrical codes dry

Price: 7.95 USD

Location: Rowland Heights, California

End Time: 2024-08-30T14:37:13.000Z

Shipping Cost: 0 USD