Description: MicroLubrol® M-77 LUBRICANT PASTEExtreme Pressure Lubricating Paste / Grease with 60+% Moly in a High-Performance Silicone Oil Base w/ Lithium Thickener.8 ounces (8 oz. / 227 grams.) BY WEIGHT in a CONVENIENT and DURABLE Double Wall Polypropylene Plastic Jar w/ Lined Cap for Secure Closing. Product features:SIMILAR INGREDIENTS AND PROPERTIES AS DOW CORNING MOLYKOTE M-77.Over 60% Molybdenum disulfide, CAS# 1317-33-5.Base Oil: Dimethyl, phenylmethyl siloxane, trimethyl terminated, CAS# 63148-52-7.Thickener: 12-Hydroxy lithium stearate, CAS# 7620-77-1.Similar black-grey color, consistency, density: 1.95 gm./mL at 20°C (68°F), and base oil viscosity: 125 mm2/s at 25°C (77°F).Paste lubrication up to 230ºC (446ºF).Dry lubrication up to 400ºC (750ºF).Good water resistance.Good volatilization properties.Compatibility with many types of elastomers and plastics.Wider and higher operating temperature range than organic oil based pastes.Extreme load handling capacity.Apply by brushing or burnishing. A multipurpose, extreme pressure lubricating paste that can be used over a wide temperature range. It contains over 60 percent molybdenum disulfide lubricating solids in a Lithium soap thickened ultra-high performance silicone fluid. Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme loads and temperatures. At temperatures above 230ºC (446ºF), the carrier volatilizes leaving virtually no residue and the remaining dry sliding film itself takes over the lubrication up to 400ºC (750ºF). For automotive and heavy duty general industrial use. A SUPERIOR COMBINATION: - contains molybdenum disulfide ("Moly") for excellent metal/metal contact lubrication. - Silicone oil based; contains NO mineral or petroleum oils so it is safe for most plastics and rubbers. - Resistant to chemicals and oxidation. - Protects against fretting corrosion. ADVANTAGES: - Extreme pressure anti-seize lubricant paste for assembly and press fitting of new and rebuilt parts and fitting of threaded connections. - lubricates surfaces subject to extreme pressures and wide temperature ranges. - Prevents galling during machinery running-in period. - Extends the wear life of moving parts and equipment. - Help protect against fretting corrosion and cold welding of moving joints. APPLICATIONS: - A running-in lubricant for new or rebuilt equipment including gears, splines, journal bearings, cams and ways. - An assembly lubricant to reduce torque in fastening and unfastening of threads and bolts, minimize tension variation in bolts, facilitate assembly and disassembly and help prevent damage to threads. - Press-fitting lubricant to allow press fitting without chatter or stick-slip that reduces the fit force pressure required for interference fitting and minimizes distortion. - General-purpose lubricant for bearing shafts, bushings, splines, O-rings, packings and seals (except silicone rubber). - Assembly applications where high temperature is a factor. - Lubricating during running-in of gears, splines, journal bearings, cams; reducing torque in tightening threads and bolts; lubricating bearing shafts, O-rings, packings and seals, brake assemblies; press-fitting. - Metal/metal combinations with frictional and contact surfaces, brake anchor plates, and the brake pistons of disc brakes. - Suitable for lubricating parts consisting of materials that are not resistant to mineral oils. NOTE: This material is NOT tested and is NOT represented as suitable for food, medical or pharmaceutical uses. NOTE: Please inquire about discounted shipping for combined or quantity purchases. MICROLUBROL® is a trademark of MicroLubrol, LLC. MicroLubrol, LLC is a supplier and manufacturer of ultra-high quality lubricants for specialty applications. We specialize in lubricants for scientific, precision, hobby and sports equipment which, due to modern technological advances, have reached unparallelled levels of sophistication in materials and component precision that we strive to match with the lubricant products we provide for them. We pride ourselves in using the highest quality and highest technology lubricant products to provide the highest level of performance for each and every application. The correct choice of lubricant for your equipment will insure that it is utilized to its highest possible level of efficiency and performance. We supply serious lubricants for serious applications. (Dow Corning® and Molykote® are Registered trademarks of Dow Corning Corporation. Microlubrol® is a trademark of MicroLubrol, LLC. Dow Corning Corporation, U.S.A. is not affiliated with and does not endorse MicroLubrol, LLC, or its products.) TERMS & CONDITIONSBy bidding and paying for this Item, the Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. The Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. In any and all cases, Seller's liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction.Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder.We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment.WE SHIP INTERNATIONALLY however, due to delivery problems, not to some locations. Buyers in a location that we do not show a shipping option for, please contact us BEFORE buying the item.TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!
Price: 69.95 USD
Location: Verona, New Jersey
End Time: 2024-08-05T15:55:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: MicroLubrol
Model: M-77
MPN: MLM77-8
Country/Region of Manufacture: United States
