Microchip PIC Prototype Board w RS232 and ICSP, 28- & 40-pin DIP

Description: Microchip PIC Prototype Board w RS232 and ICSP, 28- & 40-pin DIP Prototyping PCB for 28- and 40-pin Microchip PIC Microcontrollers with RS232 Port, Status LED, 6-pin single row (Olimex) and RJ12 (Microchip) ICSP connectors, 3.3V & 5.0V Power Supply Circuit and exchangeable Crystal Oscillator Circuit PIC Prototype Board Features Ships completely assembled and tested 28-pin and 40-pin DIL microcontroller sockets Jumper Selectable +3.3V/5.0V board supply voltage Power plug-in jack: 5.5mm outer, 2.5mm inner diameter Accepts AC and DC input voltage Minimum Input voltage should be 2.0VDC or 1.5VAC higher than desired board supply voltage Maximum Input voltage 12VDC or 9VAC RS232 DB9 female connector with MAX2232 interface circuit and Tx, Rx, CTS, DTR/RTS signals Rx and Tx pins are connected to PIC UART pins Connect CTS,DTR/RTS signals to general I/O pins of your choice MAX2232 provides reliable RS232 at 3.3V and 5.0V board Vcc6-pin single row and RJ12 ICSP/ICD connectors for in-circuit programming and debugging20 MHz quartz crystal oscillator in machined, spring loaded socket for easy replacement Reset button Push button connected to RE2 (DIP40) and RA5 (DIP28), can be connected/ disconnected via jumper Status LED connected to RA0 via removable jumper Extension solder pads for every µC pin Grid 100 mils GND bus Vcc bus FR-4, 1.5 mm (0.062"), single layer, electroless nickel/immersion gold (ENIG) plating, green soldermask, white silkscreen component print Four mounting holes

Price: 6 USD

Location: Carson City, Nevada

End Time: 2024-11-04T15:50:24.000Z

Shipping Cost: N/A USD