Micro SD TF Memory Card Reader Module with SPI interface For Arduino

Description: Micro SD Memory Card Storage Board Module with SPI Interface For Arduino This MicroSD Card Adapter module is a Micro SD card reader module with an SPI interface via the file system driver, requiring an Arduino (or comparable) microcontroller system to complete the MicroSD system to read and write files. Arduino users can directly use the Arduino IDE that comes with an SD card to complete the library card initialization and read-write. Features: Supports Micro SD and Micro SDHC cards (high speed card) The level conversion circuit board can interface with 5V or 3.3V levels The power supply input (Vcc) is 4.5V to 5.5V. The module includes an AMS1117-3.3 3.3V voltage regulator circuit to support the 3.3V level requirements The communication interface is a standard SPI interface 4x M2 screw positioning holes (2.2mm diameter) for easy installation MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Micro SD card connector: yes since the bomb deck for easy card insertion and removal Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combinationInterface Description: Control Interface: Six pin header (GND, VCC, MISO, MOSI, SCK, CS) GND: Ground VCC: DC power supply input - 4.5V to 5.5V MISO, MOSI, SCK: SPI bus, CS: Chip select signal pin3.3V regulator circuit: AMS1117-3.3 LDO regulator output 3.3V for level conversion chip, Micro SD card supply Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal Package includes: Micro SD TF Card Memory Module

Price: 5.29 USD

Location: Alpharetta, Georgia

End Time: 2024-09-02T00:29:01.000Z

Shipping Cost: N/A USD