Micro ATX Case C2P, Mini-Tower ATX/ITX/DTX Case, Aluminum Gaming (#3776B)

Description: Micro ATX Case C2P, Mini-Tower ATX/ITX/DTX Case, Aluminum Gaming MATX PC Case with Tempered Glass Side Panel Supporting Full Size GPUAbout this itemMini Size ATX Case:15.3L capacity MATX case with the size 13.47*10.95*6.38(inch). ZZEW C2P is the expansion style of C2 mini PC CaseSimple and compact Case Design: 1.5mm Aluminum body with side panel 3mm transparent tempered glassMicro ATX PSU available: Support SFX, SFX-L and ATX power supply(140*150*86mm), and standard mATX(244*244mm), DTX and itx motherboardsOther hardwares available: Support GPU size 328*137*64mm Max, 1*3.5-inch HDD and 1*2.5-inch SSD, CPU radiators within 136mmHigh efficient heat dissipation: Support air cooling fan 12025*2 and 9025 *1. Three side holes for heat dissipation to reduce the temperatureHardwares Installation Details:Motherboard Support standard mATX motherboard(244*244mm) Compatible with non-standard mATX / DTX / itx motherboardPower supply Supports standard ATX power supply(140 *150 *86mm) >>> *The power supply length is limited to 160mm and compatible with SFX-Land SFX power supplies >>> *When power supply length is above 160mm, the length of the graphics card is limited to 260mm Built in power extension cable and ATX / SFX dual-mode power supply bracketGraphics card Supports graphics card size within 328*137*64mm The over shoulder space is 31mm. Pay attention to the space of power supply wires >>> * The length of the graphics card affects the number of hard disks and the length of the power supply >>>*When the graphics card length is about 260mm, it can support 150 /160mm power supplyCPU heat dissipation Supports CPU radiators within 136mm heightFan Supports 12025 * 2 and 9025 * 1 fans >>> *Top: 12025 * 2 or 9025 * 2 >>> *Rear window: 9025 * 1 >>> *Bottom: The bottom hole supports the flexible installation of the fans. It can be increased by 12025 * 2 or 9025 * 3 without other hardware interferenceHard disk Supports 3.5"*1 HDD horizontal installation and 2.5"*1 SSD side vertical installation on the bottom >>> *90 degree elbow wire is required for 3.5"HDD vertical installation >>> *The bottom hole supports flexible installation of the hard disks. When there is no interference of other hardware, the hard disk 3.5"* 2 HDD and 2.5"* 2 SSD can be added

Price: 49 USD

Location: Shelby, North Carolina

End Time: 2025-01-08T21:28:55.000Z

Shipping Cost: N/A USD