Description: Ultrasonic Surgical Medical Cleaner by SharperTek Our new medical ultrasonic cleaner is design to clean surgical tools for the Intuitive Surgical Da Vinci Robot tools. It can ultrasonically clean and flush both the SI and XI surgical tools models. This machine can also be used to clean and flush endoscopic surgical tools and other lumen instruments. P.S.; Intuitive Surgical and Da Vinci are registered trademarks by Intuitive Surgical inc. APPLICATION Designed for the removal of minute biological debris from difficult to clean areas of surgical and laboratory devices while soaking in a detergent solution. Use of this product should follow removal of gross debris as soil mass can dampen ultrasonic cavitations effectively reducing cleaning results. Following ultrasonic cleaning materials are to be rinsed & dried thoroughly in a companion Rinser/Blow-Off or processed through a mechanical Washer/Disinfector prior to preparing for terminal sterilization. FEATURES OF THIS PRODUCT Stainless Steel Construction All exterior panels are type 304 stainless steel with a #4 polished finish. The sonic cleaning chamber is constructed of low carbon 12-gauge type 316L mirror finish stainless steel for increased corrosion resistance. Automated Controls and HMI Display A Programmable Logic Controller (PLC) located behind the front access door is used to program & control adjustable parameters as well as maintain control of automated functions. UV Light and Ozone Swivel Lid Provides and extra layer of cleanliness. Feature can be turned ON/OFF Pressure air Blow Off Blow-Off lumen instruments post rinse cycle. Feature can be turned ON/OFF Automatic Fill Controller will automatically fill the sonic tank once cycle starts Automatic Rinse and Spray Cycle Controller will automatically fill the sonic tank without chemistry sonicates and spray rinse. Liquid Level Sensors A low liquid level sensor is provided to assure the heaters are covered with water and a high level sensor is provided to assure proper liquid level depth for ultrasonic cleaning. Overflow Protection This product is equipped with built-in overflow to drain. Automatic Cycle Start & Stop Controller will automatically initiate start of ultrasonic cavitation once the tray has lowered into the solution and the tank is full. Audible Cycle Alarm An audible alarm will signal the start of a cycle as the lid closes and the end of a cycle as the lid opens. Ozone and UV light Generator Helps in maintaining a clean environment. Automatic Cycle Timer Controller will automatically run programmed cycle time. Automatic Solution Heater Thermostat automatically controls heater and maintains tank solution at pre-set temperature. Automatic Detergent Dosing Controller will automatically dispense a pre-set amount of sonic detergent into the water as the tank fills. Automatic Drain Controller will automatically open the drain valve when the DRAIN switch is pressed. MODEL SHM1000 Overall Cabinet: 38" L x 19.5" W x 22" H Working Height: Table Top Unit Dry Weight: 120 Pounds Operating Weight: 150 Pounds SONIC CLEANING CHAMBER Overall Size: 28" L x 14" W x 8.6" Liquid Volume: 10 Gallons Effective Liquid Depth: 6" Maximum Tray Size: 27.5" L x 13" W x 4" High Maximum Load: 35 Pounds (15.9 kg) ULTRASONICS Transducer Type: Piezoelectric Quantity: 20 Tank Bonding: Various Generator Output: 1000 Watt Frequency: 40 / 135 KHzBENCHTOP BASIC MODEL TankDual Frequency 40 KHz / 135 KHz UltrasonicHeatHinged LidBasket with LED Display for heat and ultrasonic timer lumen FlushingFused power entry moduleAdjustable Feet HeightDrainFill Port BENCHTOP OPTIONS HMI Controls includes the below: Hot / Cold Inlets Programmable recipes Power Drain Chemical Dosing Pump Air Purge Spray WashUV / Ozone GeneratorTubular TransducerPush/Pull Flushing FeatureSpray Wand WARRANTY SharperTek USA Inc. warrants that each ultrasonic cleaner is carefully inspected and tested to specifications and leaves the factory in proper working order free of visible defects. Each ultrasonic cleaner is warranted for one year and includes parts and labor (excluding expendable parts) from the prescribed Start of Warranty. Applies only to Domestic U.S.A. Puerto Rico and Canadian shipments.
Price: 26400 USD
Location: Pontiac, Michigan
End Time: 2024-08-30T17:12:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Custom Bundle: No
Modified Item: No
Country/Region of Manufacture: Michigan United States
MPN: STM1500
Brand: ultrasonicsdirect