Description: This listing is for a resin 3D printed MDG-2A Rakshasa mech model, printed under license from Syllogy. Comes with a resin or plastic 30mm hex base, as supplies allow! Note: Video of Atlas model is for informative purposes only, to show quality of printed models. You will not receive this model. Sized to be compatible with CGL models, but may have slight discrepancies! All Pip'z Prints models are printed using name brand ABS-like resin for maximum strength. Models are shipped fully cured, and removed from supports. Some additional model work, such as filing or support nub removal may be necessary. All models provided unpainted, and colors of resin may vary. I do custom projects! Reach out to me at my store if you have custom models you would like printed, or need ideas for a lance/star/army! General Mech Chassis Lore: The Rakshasa was designed by engineers at the New Avalon Institute of Science in an attempt to copy the Mad Cat . The finished product, while not as powerful as the OmniMech it emulates, is a powerful 'Mech with an undeserved bad reputation. The Rakshasa is powered by a GM 375 XL engine, giving it comparable ground speed to the 'Mech it attempts to emulate, and built on a GM Marauder Special MD Endo Steel chassis to save weight and allow the 'Mech to carry as similar a weapons payload as possible to the Mad Cat. The Rakshasa also carries eleven and a half tons of StarGuard ferro-fibrous armor giving it slightly less than maximum armor protection. Weapons and EquipmentThe Rakshasa carries as its primary long range weapons a pair of Federated 10-shot LRM-10 launchers. These are mated to an Artemis IV fire control system which gives them greater missile accuracy. The LRM launchers are backed up by a pair of ExoStar ER Large Lasers which provide the 'Mech with respectable firepower at long range. For close combat, the Rakshasa carries two Martell Medium lasers and a Martell Medium Pulse Laser. While not identical to the Mad Cat, the Rakshasa is a formidable 'Mech on the modern battlefield. Chassis specific: MDG-2A A departure from the attempt to emulate the Mad Cat, the 2A model removes the 'Mechs arsenal and upgrades it with a new weapons mix geared toward close combat. The primary weapon is a rotary autocannon/5. This is backed up at shorter ranges by a Large Pulse Laser and for point-blank combat, the 'Mech carries four Medium Pulse Lasers. BV (1.0) = 1,480[3][9], BV (2.0) = 1,766[10]
Price: 6.5 USD
Location: Kissimmee, Florida
End Time: 2025-02-03T00:26:52.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Syllogy
Country/Region of Manufacture: United States
