Marshall 2054 5" In Dash Electronic Speedometer 0-160 MPH Silver Aluminum Bezel

Description: Marshall 2054 5" In Dash Electronic Speedometer 0-160 MPH Silver Aluminum Bezel Part # 2054 Marshall 5" In-Dash Electronic Programmable Speedometer, 0-160MPH COMP II LED Black Dial, Silver Aluminum Bezel Why Buy Marshall Instruments Auto GaugesWe double check each gauge for correct operation before packing your order. This process includes putting signals to all gauges to verify correct operation.We verify no accessory items are missing (u-clamps, bulbs, senders etc) . FeaturesHigh quality gauge made in Orange County, CA USA.High-speed full sweep stepper motor movementProgrammable speedo with one-step easy calibration and 2 Trip meters Works with hall effect senders, vehicle speed sensors (VSS) or GPS senders.White through-the-dial LED lighting for easy viewing at night3D glowing pointer for easy visibility at night Made in the U.S.A.This item is made in California, USA. A speedometer sending unit is not included. This speedometer will work with any OEM or aftermarket speed sensor or electronic module that meets the following conditions Pulse range generated proportional to the vehicle speedSignal with minimum 3V peak to peak signal - typical for 3-wire hall effect and 2 wire vehicle speed sensor outputsoutput of 4,000 to 200,000 pulses per mile (most senders are 16,000 ppm) If you currently have a mechanical speedometer (cable driven) you will need a hall effect sender. If you need a hall effect sender we can add a FORD or GM/Mopar hall effect sender to your order for a nominal charge. Contact Marshall Instruments for details. The hall effect sender installs on your current transmission cable take off location. The signal from the hall effect sender (12V Square Wave signal) will work with this electric speedometer. This speedometer will also work with aftermarket GPS style senders (12V square wave signal).

Price: 186 USD

Location: Austin, Texas

End Time: 2024-11-04T01:04:11.000Z

Shipping Cost: 0 USD