MARINE CERAMIC COATING BOAT TEAK WOOD DECKS TRIM SEALER CLEAR COAT STAIN SALT

Description: SUPERMAXXCERAMIC WOOD SEALERDECKS, TRIM, RAILINGUse on All Un-Finished Wood SurfacesRecommended application is every 2-3 years.Advanced Polysilazane Nano Ceramic Formula100% Satisfaction GuaranteeMade in AmericaSafe & Effective on all Un-Finished Wood Surfaces. About The ProductSupermaxx Marine Grade Wood Coating is the strongest wood sealer available and features superior quality for superior results. Supermaxx Wood Sealer is both a hydrophobic and oleophobic Polysilazane Ceramic polymer that densifies and cures to a ceramic-like surface. This high-quality Ceramic clear coat sealer penetrates into wood surfaces and repels all staining materials. This is important for your wood surfaces which provide breathability, and is extremely durable, long-lasting, and offers superior sealing protection.Additionally, it cures to a diamond-hard ceramic surface that densifies the wood fibers providing a durable UV-resistant natural look with superior stain protection.Supermaxx Marine Grade Ceramic Coating penetrates deep into all Teakwood surfaces, providing the ultimate protection under the surface and on top. It converts into a safe, durable, clear ceramic polymer material that fills the pores of the wood which keeps staining materials from entering and damaging the wood surface. It also blocks unhealthy bacteria, germs, oils, and dirt which are not good for your surfaces, or your health. As an added feature, Supermaxx Ceramic Wood Sealer helps make cleaning quicker and easier with less maintenance. Moreover, it is easier to use than typical solvent or water-based wood sealers allowing virtually anyone to apply a quality application without streaking. Use on all your UN-SEALED Wood SurfacesThe World's Best Marine Grade Teakwood SealerFaster, Better & Easier CleaningMade in AmericaNatural LookLess MaintenanceMarine GradeBetter Solutions for Better Results Product Directions: It is highly recommended that before applying a sealer, you do a Deep Cleaning of your wood surfaces. This gets the oils and dirt out of the pores which keeps them from being sealed in and allows the sealer to penetrate better into all the wood’s pores. Step 1 – Deep CleaningIt is recommended before applying a sealer that you first do a deep cleaning as detailed in the above “Deep Cleaning” sections. After deep cleaning, we recommended that you allow the wood surfaces to dry for at least 12 hours before proceeding with applying a sealer. Step 2 – Wipe, Brush, Pad, Spray, or Roll On.After your wood surface is completely clean and dry, apply the sealer onto the surface. Apply enough sealer so that the entire surface area is wet. Once entirely wet with sealer, allow drying for at least 6 hours before use.3.38oz/100ml - SIZE AVAILABLE8oz/237ml - SIZE AVAILABLE16oz/473/ml - SIZE AVAILABLEONE LITER/1000ml - SIZE AVAILABLE

Price: 115.95 USD

Location: Delray Beach, Florida

End Time: 2024-08-11T19:12:03.000Z

Shipping Cost: 0 USD