Description: Up for sale here is this rebuild kit for a Marantz 2220B (not the 2220). This includes all the parts you need to rebuild the Marantz 2220B P800 power supply board, P400 phono EQ board, P700 amplifier board, PE01 preamp board, and all four tuner boards, plus it includes upgraded replacement main capacitors. This does not include new lights, fuses, or output transistors. The correct replacement output transistors are two MJ21195G (replaces 2SA627) and two MJ21196G (replaces 2SD188), available here. Please do not buy any of the Chinese output transistors listed on eBay--these are counterfeit and may damage your receiver. The 2220B uses a protection relay, located on the amplifier board. There are two different versions of the 2220B--the common one uses a normal MY2 relay, and one (less common) uses a small milky-white LC2 relay. The kit does not include a relay, but I would strongly recommend replacing it. Open up your 2220B, take a look at the amp board, and figure out which relay you have. Then use "add to cart" on the kit as well as either the larger MY2 relay or the small milky-white LC2 relay. When you check out, shipping will combine automatically. This kit includes the following: P800 Power Supply kit: 6 capacitors2 double diodes1 diode2 transistors P400 Phono EQ Board:7 capacitors6 transistors P700 Amplifier Board: 10 capacitors4 transistors4 diodes (to replace two glass bead varistors) PE01 Preamp Board:13 capacitors8 transistors 4 Tuner boards: 26 capacitors2 transistors 2 new main capacitors (same diameter as the old caps so they will fit the clamps, upgraded voltage ratings)Instructions The kit for each board is bagged individually to make things easier. These are all high-quality brand new genuine parts. The main capacitors are Cornell-Dubilier 6800 uf 80v capacitors, and the other capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, and Wima film caps at the same uf ratings and the same or higher voltage ratings. The transistors and diodes are the correct Fairchild/Onsemi subs for the original transistors. These are extremely high-quality parts, and they are what I use when I rebuild Marantz equipment. I will include surprisingly well-written instructions, but rebuilding a receiver is moderately complicated, and you should know what you're doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with a 60W or 100W incandescent bulb. Please see my pictures for details. US shipping and handling is $10, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 30 different values, a large variety of transistors for vintage stereo repair, new 250v yellow film crossover capacitors, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
Price: 100 USD
Location: Milwaukee, Wisconsin
End Time: 2024-08-09T13:02:55.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: 2220B
Country/Region of Manufacture: United States
Brand: Marantz
