Makita TD173DZ Impact Driver 18V 1/4" Brushless Tool Body Only, New-OpenBox

Description: Makita TD173DZ Impact Driver 18V 1/4" Brushless Tool Body Only New-OpenBox This is the purchase page where the customer selects and confirms the product from the variations. Description Condition: New-OpenBox 　◆Bare Tool 　◆Brand New, Not in Retail Packaging 　◆NEW TOOL TAKEN OUT OF A NEW KIT 　◆100% Genuine Makita TD173D Impact Driver, Made in Japan 　◆BUYER WILL RECEIVE WHAT IS SHOWN ON PHOTOS 　TD173D Tool Body Only 　Makita TD173D Tool Body x 1 　Options which can be bundled: 　Anex AKL-174 Impact compatible keyless drill chuck, Kong chuck Φ1.5mm～13mm x 1　Vessel Sakisbo Slim Torsion Bit 5-Piece Set No.SDT5P2065 (+2 x φ4.5 x 65 5-Piece) x 1　Vessel Sakisbo Slim Torsion Bit 5-Piece Set No.SDT5P2082 (+2 x φ4.5 x 82 x 5-Piece) x 1　Vessel Sakisbo Slim Torsion Bit 5-Piece Set No.SDT5P2110 (+2 x φ4.5 x 110 5-Piece) x 1 　　　　　　　　　　　　 Item Description: TD173D is a 6.35mm(1/4 inch) hexagonal-shaft 18V impact driver. Total length 111mm, weight 1.5kg (with battery installed). Despite its compact and lightweight body, high power maximum tightening torque 180N･m. The ring-emitting LED light dramatically improves visibility during work, and the illuminance can be switched between 3 levels (strong/medium/weak). It can be used as a work light and can also be used as a simple lighting. Lighting time is about 1 hour-autoshut-off. The new trigger switch enables intuitive trigger shifting operation from low speed to high speed. The easy-to-see and easy-to-use operation panel located at the back allows you to operate the mode and check the remaining battery capacity while holding it.The inclination of the impact driver body during corner hitting is about 10.5°, which is excellent for corner hitting. ●Wood Mode: Start tightening slowly with the trigger fully open, fastest tightening with automatic transmission. ●Volt Mode: Fastest instantly with forward rotation/trigger ON. Reverse rotation/automatic stop when nut is loosened 　(reverse rotation auto stop) ●Thin MetalPlate Teks Mode: Automatically stops upon impact detection after screw penetration. ●Thick MetalPlate Teks Mode: Reduces screw head jump and cam-out. ●Mode Memory Function: By pressing two buttons at the same time, one frequently used mode can be registered. Battery voltage (DC) : 18V Motor: Brushless Power source: DC Capacity Ordinary bolt:M5-M16 Capacity High-tension bolt:M5-M14 Capacity machine screw:4mm-8mm Capacity tex screw:3.5mm-6mm Capacity Course Thread:22mm-125mm Hexagonal shaft:6.35mm(1/4inch) Maximum torque:180 Nm Strike switching:4 Mode Payment We accept Managed-Payments ONLY. Please pay us within 5 DAYS. Shipping We will ship using the following courier-delivery-companies. FedEx, DHL, UPS and JapanPost. When we enter your address into the courier system after placing your order, a remote area fee may apply. If there is a remote area fee of around $30, we will contact you. As this is a cross-border transaction, please ensure that the delivery address is correct. Feel free to contact us if you have any questions. Returns After receiving the products, please contact us within 30 days. We only accept the item in original conditions; unopened and unused products could be returned. Return shipping cost must be paid by buyers. Although some products are marked as free shipping, please note that the sales price includes air freight, fuel surcharge, demand surcharge, and other expenses. Regarding returns due to initial defects or troubles, We will respond with a full refund.And the shipping fee of returns is paid by the seller. If the customer does not receive the product due to long-term absence, refusal to receive it, wrong address, etc., and the storage period of the shipping company has passed or the product is returned, we may ask you to bear the air-transportation expenses and other fees. Please be aware of this before purchasing. Deliveries Outside Japan Important Note About Customs Charges; If shipping outside of Japan, your order is likely to be subject to Customs duty and taxes as it arrives in the destination country. You will be contacted directly by Customs or Courier-Delivery-Companies for this payment. Unfortunately we don’t know how much the charges will be. It’s always best to get in touch with your local customs office or government website for advice before ordering. According to the DHL website, "ALL YOU NEED TO KNOW ABOUT US IMPORT TAX AND DUTIES". Generally, goods valued over US$800 are subject to duties and taxes in the US. However, this US import tax threshold only applies to certain goods. There are exclusions that can be imported duty-free and are not liable for customs tariffs. The amount of import tax and duties to be paid depends on the country from which the goods are imported. Duty tax rates are between 0 to 37.5% with the typical rate being 5.63%. A flat rate of 3% applies to e-commerce purchases that are in excess of the US import tax threshold limits. We will never underestimate the value of an item or declare it as a gift on the customs declaration form. These actions violate United States law and international conventions.

Price: 9.98 USD

Location: Honsyu

End Time: 2024-02-16T02:54:37.000Z

Shipping Cost: 25 USD

Product Images

Item Specifics

All returns accepted: ReturnsNotAccepted

Maximum Torque: 180 Nm

Battery Technology: Lithium-Ion (Li-Ion)

Speed: 3600 RPM

Battery Included: No

Power Source: Battery

Item Length: 111 mm

Auxiliary Handle: No

Brand: Makita

Chuck Size: 1/4 in, Type A 13mm anvil for JDM

Type: Impact Driver

Item Height: 234 mm

Motor Type: Brushless

Voltage: 18 V

Model: TD173DZ

Features: Compact

Chuck Type: Keyless

Country/Region of Manufacture: Japan

Item Width: 81 mm

Item Weight: 1 kg

Available Variations

Color: Purple

Price: 149.98 USD

Available Quantity: 0

Quantity Sold: 0

Color: Yellow

Price: 165 USD

Available Quantity: 1

Quantity Sold: 0

Color: Olive

Price: 149.98 USD

Available Quantity: 2

Quantity Sold: 1

Color: Blue

Price: 149.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: Black

Price: 149.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: Anex AKL-174 Drill Chuck

Price: 50.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: VesselBit SDT5P2065 65mm 5PSet

Price: 9.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: VesselBit SDT5P2082 82mm 5PSet

Price: 10.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: VesselBit SDT5P2110 110mm 5PSet

Price: 11.98 USD

Available Quantity: 1

Quantity Sold: 0

Color: Makita ProCase for TD173D Impact Driver

Price: 68.99 USD

Available Quantity: 1

Quantity Sold: 0