LJ8900W LIFTMASTER SIDE MOUNT 8900W LT DUTY COMMERCIAL Garage Opener 3-PACK

Description: Liftmaster LJ8900W Light Duty Commercial Jackshaft OperatorLot of 3 UnitsEach Unit Comes with Cable Monitor, Safety Beam Sensors, and Commercial Wall StationRemotes and Outdoor Keypads are available for additional purchase. Business ConnectivityMonitor and ControlmyQ® technology enables monitoring and control of the operators through a mobile app.Facility's NetworkEasily connect the operator to the facility's network with built-in Wi-Fi®.Real-time alertsIndicate the status of doors via email.Business Safety and SecuritySafety StandardsMeets UL 325 Safety Standards.Commercial Safety SensorsProtect people and vehicles with safety sensors and accessories that stop the door from closing on obstructions.Security+ 2.0®Safeguard facility access with Security + 2.0 technology, opening for registered devices only.Commercial PowerCurrent Rating120V AC, 60Hz Voltage, 1.5A Current RatingUL® ListedUL ListedReduce MaintenanceExtend hardware life and reduce maintenance with smooth start/stop operation.Ensure AccessEnsure access to the facility when the power's out by adding Battery Backup 485LM, optional accessory). The LJ8900W side mount garage door opener is meant for light duty commercial applications. Replaces LiftMaster's previous model 3900. Door Requirements:1" outside diameter torsion bar4-6" drums. Not to be used with tapered drums over 6"High lift up to 54" or 14' standard sectional doorDoors up to 18' wideDoors up to 180 square feet Installation Requirements:Must have minimum of 2.5" between the wall and the center of the torsion bar.Must hvae a minimum of 3" between the ceiling and the center of the torsion bar.Must have a minimum of 8.5 between the side wall and the end of the torsion bar.The torsion bar must extend at least 1.5" past the bearing. May vary depending on your installation requriements.An electric outlet is required within 6' of the installation area. If one does not exist contact a qualified electrician.Depending upon building constructions, extension brackets or wood blocks may be needed to install safety reversing sensors and cable tension monitor.Alternated floor mounting of the safety reversing sensors will require hardware (not provided).Any gap between the floor and the bottom of the door must not exceed 1/4", otherwise the safety reversing sensors may not work properly. Features:MyQ® Technology enables monitoring and control of the facility operators through a mobile app.Built-in Wi-Fi® for simple operator internet connection.Real-Time Alerts indicate the status of doors via email or push notifications. Quiet and Secure:Smooth Start/Stop Reduces wear for lasting performance.Battery Backup Capable: Ensures access even when the power’s out.Security+ 2.0® Safeguards facility access with rolling code technology, opening for registered devices only.The Protector System® Auto-Reverses the door if an entrapment protection device detects an obstruction.UL ® 325 REQUIRES ALL COMMERCIAL DOOR OPERATORS TO BE EITHER CONSTANT PRESSURE TO CLOSE OR BE EQUIPPED WITH A PRIMARY EXTERNAL MONITORED ENTRAPMENT DEVICE. Reliable:Warranty 2 Years.

Price: 1344.66 USD

Location: Round Lake, Illinois

End Time: 2025-02-10T15:45:59.000Z

Shipping Cost: N/A USD