LizardSkin Cool & Quiet Kit

Description: Protects surface from starring and rust, It is a quick and easy spray-on application, Engineered to enhance your stereo’s sound and performance, It will dampen annoying rattles, vibrations, and road noise, One 2 gallon bucket will cover approximately 50 square feet LizardSkin Cool & Quiet Kit Sku # 91603045 Mfr. Part # 91603045 Condition New Brand Lizardskin Sold Each Details Info The interior of any build is often subject to less time and money spent because it isn't quite as visible to the outside world or sometimes funds run short by the time you make your way inside. Lay down some quality sound and thermal insulation with a one-stop solution from LizardSkin! Kit Contains: (1) LizardSkin Sound Control Insulation (1) LizardSkin Ceramic Thermal Insulation LizardSkin Sound Control Insulation LizardSkin Sound Control is a spray-applied automotive sound damping coating that is great for reducing exterior noises and enhancing sound systems. It is an advanced, water-based composition of a high-grade acrylic binder with sound-damping particles. It is best applied by the SuperPro Application Kit to a clean and dry, rust-free surface. For maximum acoustic performance in your ride, encapsulate the entire interior and all appropriate exterior surfaces. Since Sound Control not only dampens noise, but also protects surfaces, it will help keep the integrity of your ride intact for years. The coating can withstand temperatures to 300° F. One 2 gallon container of LizardSkin Sound Control will cover 40-45 sq. ft. at 0.040” thickness dry. 2-gallon bucket Covers approximately 50 square feet Dampen annoying rattles, vibrations, and road noise Protects surface from starring and rust Quick and easy spray-on application Fast clean up with water and soap Environmentally friendly solution Enhance your stereo’s sound and performance Non-toxic, Class A Fire-rated Impressive damping to weight ratio Continuous protective moisture barrier LizardSkin Ceramic Thermal Insulation LizardSkin is a revolutionary product that can lower the interior temperature of a vehicle from 25 to 30 degrees with only a .040" thick application. LizardSkin Ceramic Thermal Insulation coating is a premium spray-on thermal insulation product for all cars, trucks, street rods, customs or race cars - wherever heat is a problem. With LizardSkin's spray-on ceramic thermal auto insulation, heat entering the interior is reduced by 30°F or more, making for a cooler, more comfortable ride. For maximum automotive thermal performance, encapsulate the entire interior and all appropriate exterior surfaces. 2-gallon bucket Covers approximately 50 square feet Class A fire-rated Environmentally friendly solution Provides non-combustible thermal insulation Able to withstand temperatures up to 500°F No respirator needed, but dust mask/protective eyewear is recommended Easy spray-on application Offers a protective, seamless membrane Fast clean up with soap and water Specs Storage: LizardSkin Sound Control should be kept in a storage area above 60 deg F or above. Product can be reused if sealed correctly. It is best to keep container out of direct sunlight for sustained periods of time. Shelf Life: One year shelf life from date of manufacture. Caution: Do not let product freeze. (PDF) (PDF) Installation Tips How much do I need?Measure length and width of all surfaces to be coated accounting for all curves and irregular shapes.Multiply length times width to get your total square footage.Divide total Sound Control square footage by 22 to calculate gallons needed.Round up to the next gallon to account for any square footage calculation errors. Example:12.5 ft times 6.5 ft equals 81.25 sq. ft. (round up to 82 sq. ft.)Then 82 sq. ft. divided by 22 equals 3.72 gallonsBy rounding 3.72 up to 4, you will need four gallons of Sound Control NOTE: When using both products (stacking) ALWAYS apply Sound Control FIRST then apply Ceramic Insulation on top. Preparing Surfaces: LizardSkin coatings must be applied to a clean, dry surface that is free from rust and corrosion. For bare steel surfaces, a primer with at least 15% elongation is required. All other types of substrates do not require a primer. LizardSkin can be applied without scuffing to a newly primed metal surface. If existing primer or paint has been on the substrate for more than 5-7 days, the surface needs to be cleaned and scuffed to allow for good mechanical adhesion. For aluminum, stainless, fiberglass and wood, the surface needs to be cleaned and scuffed prior to the application of LizardSkin. Mask off any areas that you don’t want coated. Specs Sold in Quantity Kit Area 50 Reviews Good product, have used multiple times Rated by Po Boyz on July 23, 2021 Summary: Easy to apply, mask well; tends to go everywhere when the pressure is turned up the get a flatter texture. Yes, I recommend this product. Seems alot easier Rated by TT on April 19, 2020 Summary: Seems like a great product and alot easier than rolling & trimming mat. Time will tell....still early in the build and wont experience road noise for a bit yet. Only gave 4/5 stars because of the bucket. If the lid had a pour spout so it pours into the gun can instead of on it and around it I think it would be great. Yes, I recommend this product. Related Items / Suggested Parts LizardSkin 50125 Super Pro Application Kit Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 377 USD

Location: Lincoln, Nebraska

End Time: 2024-11-26T12:02:15.000Z

Shipping Cost: 0 USD