Live EDF AutoFocus 60fps 4K UHD imx678 HDMI USB WiFi 4K microscope camera

Description: Live EDF Auto Focus 4K Ultra HD 60fps SONY imx678 1/1.8" Sensor C mount 4K digital microscope camera 4K HDMI USB WiFi Output Please download Camera Operation Manual from this link: https://1drv.ms/b/s!AogUbo_LJJSrgigLljnsxE48gbBC?e=xSNZeR Please download Camera AutoFocus and Live EDF Operation Video from this link: https://1drv.ms/v/s!AogUbo_LJJSrgjEg3gnU3fOK9MS6?e=Jdn9FM The X5FCAM4K8MPA camera designed by RisingCam that includes multiple modes of output (HDMI/WiFi/USB), where X in ‘X5FCAM’ means a CMOS camera with multiple interfaces, and F means auto focus. It uses ultra-high performance CMOS sensor. The camera can be directly connected to an HDMI display, or it can be connected to a computer via WiFi or USB, and the image and video can be saved in an SD card /USB flash drive for on-site analysis and subsequent research. Enhanced with an embedded ARM core, this camera integrates various functions inside. With the help of a USB mouse and well-designed UI on the HDMI monitor, all functions could be easily controlled. The X5FCAM4K8MPA camera comes with the built-in Auto Focus system, which can realize Auto Focus on specific areas of the sample. By inserting a WiFi module or connecting to a computer via a USB cable, the user can directly control the camera's hardware with the software RisingView . The X5FCAM4K8MPA camera can be used for tool field inspection, microscope observation, etc. Camera Application Scientific research, digital teaching (teaching, demonstration and academic discussing); Digital laboratory, medical research; Machine vision (PCB detection, IC quality control); Medical treatment (pathological observation); Food (microbial colony observation and counting); Aviation and military; Camera Feature Auto Focus Live EDF (Extend Depth of Field) Auto Focus and Live EDF can working at same time(Under HDMI output mode) HDMI,USB,WiFi output (WiFi for Optional) SONY imx678 Sensor, senzor size:1/1.8" High G sensitivity: 3541(mV/lx/s) Resolution: 4K Ultra HD (8mp 3840x2160) Preview frame rate： 60fps @ 4K under HDMI output Real time measurement Support U disk and SD card storage Sony STARVIS 2 back-illuminated CMOS sensor 4K HDMI/ WiFi / USB multiple video synchronous outputs 4K/1080P auto switching according to monitor resolution Support 4K 60fps low delay HDMI output mode, with an average delay of 40ms SD card/USB flash drive for captured image and video storage, support local preview and playback New browsing function, providing rich file operation functions, image to image comparison, image to real-time video comparison, multi-image EDF and other functions Provide multiple focusing methods, and the size of the focusing area can be modified; Provide AF+EDF, facilitating the synthesis of high depth of field images in multiple focus areas at high magnification Excellent ISP with local tone mapping and 3D denoising Provide real-time video EDF function and real-time video WDR output function Provide two sets of default ISP parameters for biological microscope and stereo microscope Embedded XCamView for the control of the camera and image processing, supporting automatic edge finding and measurement functions RisingView Software for PC iOS/Android applications for smart phones or tablets Camera Specification Order Code Sensor & Size(mm) Pixel (μm) G Sensitivity Dark Signal Sensor Output (Recording FPS/ Resolution) Binning Exposure(ms) X5FCAM4K8MPA Sony IMX678(C) 1/1.8"(7.68x4.32) 2.0x2.0 3541mv/lx/s 0.15mv with 1/30s 60fps/3840*2160 1x1 0.019~1000 Camera Model Recording HDMI (Max FPS/Resolution) HDMI2.0 output (Max FPS/Resolution) USB3.0 output (Max FPS/Resolution) GE NETWORK output (Max FPS/Resolution) X5FCAM4K8MPA 60fps@3840*2160 60fps@3840*2160 60fps@1920*1080 30fps@3840*2160 45fps@2688*1512 60fps@1920*1080 30fps@3840*2160 60fps@1920*1080 60fps@1280*720 Note: 1. Camera Frame rate is not fixed, Frame rate relate to camera exposure time, long exposure time will reduce frame rate, So set shorter exposure time can get higher frame rate. Frame rate relate to Computer's hardware too 2. WiFi output for optional, please select when place order Interface or Button Function Description USB Mouse Connect USB mouse for easy operation with embedded XCamViewsoftware USB3.0 Connect USB flash drive to save pictures and videos Connect 5G WiFi module to transfer video wirelessly in real time Connect USB microphone for audio and video recording USB Video Connect PC or other host device to realize video image transmission HDMI Comply with HDMI2.0 standard. 4K/1080P format video output and supporting automatic switch between 4K and 1080P format according to the connected monitors SD Comply with SDIO3.0 standard and SD card could be inserted for video and images saving ON/OFF Power switch LED LED status indicator DC12V Power adapter connection (12V/1A) Video Output Interface Function Description HDMI Interface Comply with HDMI2.0 standard;60fps@4K or 60fps@1080P USB Video Interface Connecting USB Video port of PC for video transfer H264/MJPEG format video WiFi Interface Connecting 5G WiFi adapter (USB3.0 slot) in AP/STA mode Other Function Function Description Video Saving Video format：8M(3840*2160) H264/H265encoded MP4file Video Recording frame rate under HDMI ouput:60fps Image Capture 8M (3840*2160)JPEG/TIFFimage in SD card or USB flash drive(Default SD card priority, priority can be modified in settings) Measurement Saving Measurement information saved in different layer with image content Measurement information is saved together with image content in burn in mode ISP Exposure(Automatic /Manual Exposure)/ Gain，White Balance(Manual /Automatic /ROIMode)， Sharpening，3D Denoise，Saturation Adjustment，Contrast Adjustment，Brightness Adjustment， Gamma Adjustment，Color to Gray，50HZ/60HZ Anti-flicker Function Image Operation Zoom In/Zoom Out(Up to 10X), Mirror/Flip, Freeze, Cross Line, Browser(including Picture Browsing ,Video Playback , Video Compare , Picture Compare), Measurement Function Embedded RTC(Optional) To support accurate time on board Restore Factory Settings Restore camera parameters to its factory status Multiple Language Support English / Simplified Chinese / Traditional Chinese / Korean / Thailand / French / German /Spanish / Japanese / Italian / Russian / Dutch / Portuguese Software Environment under Network/USBVideo Output White Balance Auto White Balance Color Technique Ultra-Fine Color Engine Capture/Control SDK Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc) Recording System Still Picture or Movie Operating System Microsoft® Windows®XP/Vista / 7 / 8/ 8.1 /10(32 & 64 bit) OSx(MacOS X) Linux PCRequirements CPU: Equal to Intel Core2 2.8GHz or Higher Memory: 4GB or More Ethernet Port: RJ45 Ethernet Port Display:19” or Larger CD-ROM Operating Environment Operating Temperature (in Centidegree) -10°~50° Storage Temperature (in Centidegree) -20°~ 60° Operating Humidity 30~80%RH Storage Humidity 10~60%RH Power Supply DC 12V/1A Adapter Camera Pictures SONY imx678 Sensor, senzor size:1/1.8" Resolution: 4K Ultra HD (8mp 3840x2160) 4k/1080P switch adaptively, Under HDMI-output Preview frame rate 60fps@4K, Max recording frame rate 60fps Interface Function Description USB Mouse Connect USB mouse for easy operation with embedded XCamView software USB3.0 Connect USB flash drive to save pictures and videos. Connect USB-WLAN Adapter let camera connect to other device via WiFi(For optional) Connect USB cable let camera working with Computer HDMI-compatible Comply with HDMI2.0 standard. 4K/1080P format video output and supporting automatic switch between 4K and 1080P format according to the connected monitors. SD Comply with SDIO3.0 standard and SD card could be inserted for video and images saving. DC12V Power Adapter Connection 12V ON/OFF Power Switch. LED Power Indicator LED. Camera Working Pictures 1. HDMI output mode Comply with HDMI2.0 standard. 4K/1080P format video output and supporting automatic switch between 4K and 1080P format according to the connected monitors. Camera can capture photo and recording video under HDMI mode, the photo and video can be saved into SD card or USB drive, the photo and video in SD card or USB drive can be replayed on TV monitor 4K Camera connect to 19inch 1080P TV monitor 4K Camera connect to 55inch 4K TV monitor Camera Menu Camera Funtion Panel Camera Control Panel The Camera Control Panel controls the camera to achieve the best video or image quality according to the specific applications; It will pop up automatically when the mouse cursor is moved to the left side of the video window (in measurement status, the Camera Control Panel will not pop up. The Camera Control Panel will only pop up when the measurement process is finished or terminated while user’s cursor on the left edge of the video window). Left-clicking Snap Capture image and save it to the SD card Record Record video and save it to the SD card Auto Exposure When Auto Exposure is checked, the system will automatically adjust exposure time and gain according to the value of exposure compensation Exposure Compensation Available when Auto Exposure is checked. Slide to left or right to adjust Exposure Compensation according to the current video brightness to achieve proper brightness value Exposure Time Available when Auto Exposure is unchecked. Slide to left or right to reduce or increase exposure time, adjusting brightness of the video Gain Adjust Gain to reduce or increase brightness of video. The Noise will be reduced or increased accordingly Red Slide to left or right to decrease or increase the proportion of Red in RGB on video Green Green is base for reference and cannot be adjusted Blue Slide to left or right to decrease or increase the proportion of Blue in RGB on the video Auto White Balance White Balance adjustment according to the window video every time the button is clicked Manual White Balance Adjust the Red or Blue item to set the video White Balance. Sharpness Adjust Sharpness level of the video Denoise Slide left or right to denoise the video Saturation Adjust Saturation level of the video Gamma Adjust Gamma level of the video. Slide to the right side to increase gamma and to the left to decrease gamma. Contrast Adjust Contrast level of the video. Slide to the right side to increase contrast and to the left to decrease contrast. DC HUE For DC illumination, there will be no fluctuation in light source so no need for compensating light flickering Adjust Hue level of the video. Slide to the right side to increase Hue and to the left to decrease Hue. AC(50HZ) Check AC(50HZ) to eliminate flickering caused by 50Hz illumination AC(60HZ) Check AC(60HZ) to eliminate flickering caused by 60Hz illumination Default Restore all the settings in the Camera Control Panel to default values Camera Measurement Toolbar The Measurement Toolbar will pop up when moving mouse cursor to any place near the upper edge of the video window. Here is the introduction of the various functions on the Measurement Toolbar Camera AutoFocus The AutoFocus and EDF can working at same time (AF+EDF) Please download Camera AutoFocus and Live EDF Operation Video from this link: https://1drv.ms/v/s!AogUbo_LJJSrgjEg3gnU3fOK9MS6?e=Jdn9FM https://1drv.ms/v/s!AogUbo_LJJSrgie1u-7rI-zLtP_4?e=PzUhPO 2. USB output mode This 4K Camera support UVC, so it can working with computer by USB3.0 port. RisingCam will provide RisingView software for buyer RisingView software support Windows and MAC system User can select different resolution in RisingView software Max 30fps@3840*2160 Max 45fps@2688*1512 Max 60fps@1920*1080 (Note: Camera Frame rate is not fixed, Frame rate relate to camera exposure time, long exposure time will reduce frame rate, So set shorter exposure time can get higher frame rate. Frame rate relate to Computer's hardware too) NOTE: Because USB3.0's UVC function is ISO transmission as required, WIN7 is not supported So USB3.0 output only avaliable for Win8 and Win10 system, Win7 system only support USB2.0 output USB2.0 and USB3.0 has same frame rate. RisingView for Windows RisingView for MAC NOTE: AUTO FOCUS in RisingView software RisingView can support Windows XP/Vista/7/8/10 system Only Windows version of RisingView software support Auto focus. The linux, Mac version of RisingView not support Auto focus. The Photo made by 4K Camera's USB output under Zeiss Lab A1 Bilogical microscope Zeiss Lab.A1 Trinocular microscope, Objective lens 4X, Sample:Plant rhizome Zeiss Lab.A1Trinocular microscope, Objective lens 40X, Sample:Plant rhizome 3. GE port Ethernet output mode Connecting multi-cameras to the router through the LAN port/ WiFi STA mode for the network application (The Connecting Manual in our Software CD) Please download Camera manual and video from this link: https://drive.google.com/file/d/18Q0C8KJa0nzsYBrlfRUvBOBrA0FaWCKV/view?usp=sharing Connecting camera to the PC with LAN port In LAN mode, the camera connects to a switch or router (LAN) by Ethernet cable, If a router with WLAN capability is used, users could connect the router wirelessly and control the camera. This application uses the camera as the network camera. User must configure the IP of the camera and PC manually and ensure their IP addresses in the same net. The subnet mask and gateway of the camera and PC must be the same. Start the camera after the camera is running, clicking camera setting button on the Synthesis Camera Control Toolbarat the bottom of the video window, a small window called Settings will pop up as shown below on the left side, clickingLAN property page, uncheck the DHCP item. InputIP Address,Subnet Mask andDefault Gateway for the camera. DesignateInternet Protocol Version 4 (TCP/IPv4) Settings page’s IP address on the PC with similar configuration as shown below on the right side but with differentIP address. the camera also can be connect to PC via Ethernet Cable, So this camera can working with RisingView software in PC This application uses the camera as the network camera. User must configure the IP of the camera and PC manually and ensure their IP addresses are in the same net. The subnet mask and gateway of the camera and PC must be the same. 4. WiFi output mode (WLAN or AP mode) WIFI Output Image to Computer, laptop, Android and Apple IOS mobile device Smart phone, Iphone and Ipad etc. (The PC computer and Laptop computer should has Wireless network card) WiFi Connecting Steps: (1) Install the RisingView on your Computer or install the ToupView app on the mobile device; (2) Plug the USB WLAN adapter into the camera’s USB3.0 port; (3) Connect the camera to the power adaptor and switch it on; (4) Connect the computer or mobile device with the WLAN that the camera provides; (5) The network name (SSID) and the WLAN password (The default one is 12345678) can be found on the camera. (6) Open RisingView on computer or Open app on mobile device, then it can get image from Camera NOTE: RisingView in our Software CD. IOS user Could download ToupView App from Apple App Store (itunes) Android user could download ToupView App from Google Play store App for iOS: download link https://itunes.apple.com/us/app/toupview/id911644970 App for Android:download link https://play.google.com/store/apps/details?id=com.touptek.toupview 4K Camera connect to Mobile Device WiFi App for Mobile Device (IOS or Android) Just make sure that the mobile device uses iOS 11 or higher/Android 5.1 or higher operating systems. IOS user download ToupView App from Apple App Store (itunes) Android user download ToupView App from Google Play store NOTE: ToupView App not support Auto Focus 4K Camera connect to Laptop computer via WiFi When working with computer via WiFi Output , This camera's WiFi output support Windows, Linux and Mac system RisingView can support Windows XP/Vista/7/8/10 system Only Windows version of RisingView software support Auto focus. The linux, Mac version of RisingView not support Auto focus. When working with computer via WiFi Output , This camera's WiFi output support Windows, Linux and Mac system RisingView can support Windows XP/Vista/7/8/10 system RisingCam provide RisingView software for MAC and Linux OS RisingView for MAC and Linux System This 4K Camera can working with biological microscope This 4K Camera also good choice for Surgical Operation Microscope The below picture is made by this 4K camera and Surgical Operation Microscope for Ophthalmology RisingView software instruction RisingCam Provide RisingView Software for buyer free. RisingView Download link: https://drive.google.com/file/d/1QDXrVJRZGgD1Nx0AiEP-hpnMZfeC71XC/view?usp=sharing RisingView is professional software integratedwith camera control, image capture&process, image browse image measurement and analysis.RisingView is born with the following features: 1.User-friendly UI design 2.Professional Camera Control Panel 3.Practical functions with good result Image 4. So many measurement toolsMeasurement results can export to Excel list 5. Powerful compatibility RisingView can support Windows XP/Vista/7/8/10 system Sample Pictures PCB sample Biology Sample MK54 Rabbit Emdryo Ovary Taste PineLeaf CornLeaf Sample Photo made by Buyer Camera Size camera body, made from tough, CNC aluminium alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts included. This design ensures a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions. Camera Packing The standard packing include 1. 4K camera 2. HDMI-compatible cable 3. USB3.0 Cable 4. USB Mouse 5. USB-WLAN WiFi Adapter (For optional) 6. Power Supplier 7. Software in USB flash disk Please download Camera Operation Manual from this link: https://1drv.ms/b/s!AogUbo_LJJSrgigLljnsxE48gbBC?e=xSNZeR Camera Warranty 1 Years RisingView software instruction RisingCam Provide RisingView Software for buyer free. RisingView Download link:https://drive.google.com/file/d/1MBbHtjEn1krVzVH_Dy2QFEeFU3Okz82a/view?usp=sharing RisingView is professional software integratedwith camera control, image capture&process, image browseimage measurement and analysis.RisingView is born with the following features: 1.User-friendly UI design2.Professional Camera Control Panel 3.Practical functions with good result Image 4. So many measurement toolsMeasurement results can export to Excel list 5. Powerful compatibility RisingView can support Windows XP/Vista/7/8/10 systemRisingCam provide RisingView software for MAC and Linux OS RisingView for MAC and Linux System Warranty period: 1 year RisingTech always do our best provide excellent Service before/after sales for all buyers. RisingTech will provide our technical support if buyers have any questions of camera operation. If camera has any quality problem within warranty period and must be returned to workshop repair it, RisingTech will repair camera or replacement new camera for buyer, RisingTech will stand freight. If camera has quality problem out warranty period, RisingTech will repair camera for buyers too, buyer need stand freight. If the camera is man-made damaged, no matter within or out warranty period, buyers should stand repair charges and freight.

Price: 660 USD

Location: Hangzhou

End Time: 2025-01-07T05:11:36.000Z

Shipping Cost: 0 USD