Lemorele Wireless HDMI transmitter and receiver 1080P audio video HDMI extender

Description: Product introduction: Can make LCD screens of laptops, tablets or mobile phones, projectors,All-in-one touch devices, wireless on-screen projection, such as led splice displays. A maximum of eight shipments and one receipt are allowed. 1 wireless hdmi transceiver: wireless audio and video transceiver, can achieve a wireless connection for computer, camera, decoder, nintendo switch, xbox, mobile phone, steam base and other hdmi and TV devices, projector, screen and other large screen equipment. Solves audio and video deficiencies that require the use of an hdmi cable connection. 2, wireless transmission range: the lemolo wireless hdmi adapter can reach a wireless transmission range of 50 meters, to meet the use of a large and medium classroom environment. It can also be used in a meeting room for 20 people. Allows your computer to project on the projector from any location in an environment of 200 square meters. Say goodbye to the cables. 3. Wireless transmission frequency: the use of the wifi realtek 8731bu module can achieve a dual frequency transmission of 2.4 g / 5.8 g, on the premise that there is no environmental interference, can also achieve a long distance transmission in real time. Widely used in office meetings, education and other places that need to share the screen. 4. Screen resolution: its screen resolution is 1080p, which can be used with acer projectors, benq and other brands of projectors, and also supports 100 inch conference tablets. It allows you to enjoy the big screen at the same time and also enjoy the convenience of wireless connection. Cooperative operation for 5 people: can support up to 8 transmitters with 1 receiver, can cooperate more with the meeting scene, collaborative use between several people, without replacing the use. Installation steps: Combined use of receiver and transmitter, plug and play1. Connect the receiver's hd port to the video input port of a viewing device, such as a monitor or TV.2. Connect the micro usb power port of the receiver to the charging cable and insert it into the power adapter or micro usb power port (voltage 5 v, current 2 a).Turn on the receiver power switch.3. Adjust the hd signal source of the monitor or TV set to the corresponding hd port until the receiver's start screen appears and booting is successful.4. Connect the transmitter to a computer or other device with hd video output function. Wait ten seconds after the indicator blinks at short intervals.Compositional projection. Pairing instructions: The product is factory connected.If the pairing fails due to malfunction or other circumstances, it is necessary to retrieve the device.The steps to repair it are as follows: 1. Hold down the receiver function key for more than 3 seconds and a message will appear in the interface:Release the button to connect to ezcast tx. Wait for the transmitter to go into pairing mode.2. Hold down the transmitter function button for more than 3 seconds and the indicator will flash quickly to connect. Wait until the transmitter indicator is on, indicating that the connection has been made correctly. List of products: 1 transmitter, 1 receiver, 1 instruction manual, 2 hdmi cables (50 cm)

Price: 68.73 USD

Location: Dongguan City, Guangdong Province

End Time: 2024-12-09T08:58:06.000Z

Shipping Cost: 0 USD