Lay-Z-Spa DIY WiFi Controller

Description: Information:The PCB comes soldered with the components ready for the 6-pin version of the Lay-Z-Spa pumps.This has been built and pre-flashed with the version from the below. I provide no guides on how to install nor how to configure as this is in the guide below:https://github.com/visualapproach/WiFi-remote-for-Bestway-Lay-Z-SPAThis is fully working on my Lay-Z-Spa AirJet Vegas 6 Person Hot Tub (Pump Model S100102); it is also working via MQTT into Home Assistant.It is recommended that the PCB is placed in an electrical or project box to reduce the risk of contact with live components; this is NOT included.This does not work with the Lay-Z-Spa app itself, it gives you local control or control via a local system like Home Assistant or MQTT.Note:You should pre-configure the device before connecting to the pump; power the device using the USB port and configure offline. Please read the manual:https://github.com/visualapproach/WiFi-remote-for-Bestway-Lay-Z-SPA/blob/master/bwc-manual.pdfOnce you have configured the device, if you're not familiar with finding the IP address, you should be able to access it through your browser by using: http://layzspa.localDisclaimer: This is a modification; if anything breaks or invalidates your warranty, I cannot accept liability as the seller.WARNING! WARNING - Electric Shock Can Kill!!!Touching live electrical parts can cause fatal shocks or severe burns.Pull out the mains plug from the outlet before modifying any hardware.Credit: I take no credit for the PCB design nor contents; credits to the below:Visualapproach - https://github.com/visualapproachReflashing: Should you need to reflash it due to a fault, corruption, or want the latest updates, you can use the below flashing tool:https://github.com/mossc001/LayZ-Flash

Price: 28.95 GBP

Location: THAME

End Time: 2024-09-06T12:39:34.000Z

Shipping Cost: 27.76 GBP