Description: Lambretta BOLT IN 13ltr medium range fuel tankTank is double cut either side to suit whatever kit your scooter is running onThis size tank enables you to retain your tool box as the tank replaces your original tank and the are where the airbox would fitIt is advised to remove the toolbox when fitting Bolts in using the iarscoop holes in the frame and the rear forward seat catch holes Rubber washers are advised to cut down on vibration when fitting ( not supplied ) PLEASE PROVIDE email and contact number as it is needed for the courier we use thanks NOTE:The tank is 10.25 inches wide distance from rear off toolbox to frame tube is 10.5″ so please check you have enough room before ordering. When fitting this tank do not tighten any of the bolts until the tank is in position, attach rear bracket loosely to the tank and place tank under frame loop, loosely attach front bracket via the air-scoop holes on the frame loop using the 2 M6 bolts, lift rear of tank and line up rear bracket with 2 forward seat catch bracket holes and fasten through the seat bracket into captive nuts on the tank rear bracket, once all bolts are in place then they can be tightened but do not over tighten as this can cause vibration, torque setting of 3.5-3.8LBS-FT should be adequate, all brackets must be attached. Although not supplied by the manufacturer we recommend the use of footboard round rubbers between brackets and frame when fitting
Price: 140 GBP
Location: Southport
End Time: 2024-11-19T15:42:55.000Z
Shipping Cost: 56.72 GBP
Product Images
Item Specifics
Return postage will be paid by: Seller
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Brand: Lambretta
Type: Fuel Tank
Capacity: 13 L
Items Included: Bolt
Manufacturer Part Number: Does Not Apply
Material: Steel
