KORG DS-DAC-10R USB-DAC Digital Analog Converter DSD Recording Phono input

Description: * Description It has been checked to work properly. It is in very good condition, although there are some minor scratches and dirt. This USB-DAC supports DSD recording and playback at 5.6MHz and 2.8MHz, and PCM recording and playback at up to 192kHz/24bit. It is equipped with a phono input terminal that allows direct connection of a record player. DSD recording is possible using only the “DS-DAC-10R” and “AudioGate 4”. Both recording and playback are possible in DSD formats of 5.6MHz and 2.8MHz, and PCM formats of up to 192kHz/24bit. Equipped with a phono input terminal that allows direct connection of a record player. Equipped with a phono input terminal and ground terminal that can be directly connected to a record player. It is possible to convert records directly into high-resolution data with high-quality DSD sound, and manage songs on AudioGate. The input terminal also supports LINE level input. Built-in DSD phono equalizer. In addition to the standard RIAA curve, it is also possible to support five different curves, and it is possible to apply the equalizer not only to the recording, but also to the original sound of the record that has been input/recorded as it is. ■ Carefully selected parts are used to achieve the highest sound quality. The AD converter uses the PCM4202 (made by TI). High-performance parts such as the OPA1662 (made by TI) and thin-film polymer multilayer capacitors (made by Rubycon) are used in the pre-stage circuit of the phono amplifier to make full use of the performance of the phono cartridge. The DA converter is the same CS4398 (Cirrus Logic) as used in the MR-2000S and DS-DAC series. It faithfully reproduces the original sound without adding any coloration. ■ Supports “DSD native playback” of DSD files at 2.8224MHz and 5.6448MHz. ◇Audio Interface ■Number of channels: 2 channels ■Input format (USB): DSD: 2.8224MHz / 5.6448MHz, 1bit, PCM: 44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz, 16bit / 24bit Host interface: USB 2.0 (High Speed) Audio drivers: ASIO 2.1, WDM, Core Audio Main specifications Frequency response: 10Hz to 20kHz ±1dB (fs=44.1kHz / 48kHz), 10Hz to 40kHz ±1dB ■S/N: 105dB (TYP.) 20Hz ~ 20kHz, IHF-A ■THD+N: 0.005% (TYP.) 20Hz ~ 20kHz ◇LINE OUT L/R ■Type: RCA pin jack (unbalanced) ■Load impedance: 10kΩ or more ■Specified / maximum level: -6dBV / +6dBV ◇PHONES ■Type: 6.3mm stereo phone jack ■Load impedance: 16Ω or more ■Maximum output: 70mW+70Mw@32Ω ◇LINE IN, PHONO L/R ■Type: RCA pin jack ■Input impedance: 47KΩ (LINE)/ 50KΩ (PHONO) ■Nominal level: -6dBV (LINE)/ 5mVrms (PHONO) ■Maximum level: +6dBV (LINE)/ 100mVrms (PHONO) ◇USB (device) ■Type: Type B ◇General ■Indicator: Ring LED indicator (displays sampling frequency and REC status in color) ■Power supply: USB bus power (5V 500mA) ■Power consumption: Max. 2.5W ■External dimensions: 155 (W) x 184 (D) x 49 (H) mm (including protrusions) ■Weight: 1.1kg ■Accessories: USB cable * ShippingWe ship using FedEx, DHL and Japan Post. * PaymentWe usually ship within 5〜10 business days of receiving cleared payment. * International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.

Price: 229.99 USD

Location: Saitama

End Time: 2025-01-19T05:35:57.000Z

Shipping Cost: N/A USD