Keyless remote car starter Mega 3300 3400 keyfob clicker transmitter key fob

Description: Stock #: 645One (1) Pre-Owned Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement FUNCTIONS AT 100% TESTED & GUARANTEED Megatronix / Autopage FCC ID: H50T09 (Alternate Spelling: H5OT09 H5OTO9 ) MODEL: MT-55C or VT-55C(Alternate Spelling: MT55C VT55C )Frequency: 434 MHz LED color: Green 5 buttons Replacement: AUTOPAGE XT-59 MT-65H MT-66H Compatible with the following systems: MEGA 3300 MEGA 3400 Programming Instructions: It is important to remember that during programming each individual step of the procedure must be executed within 15 seconds of the previous step. When the 15 seconds time limit is allowed to expire, the system will automatically exit programming mode. This is indicated by a long chirp from the siren. Additionally, any time the ignition key is turn off while programming, the system will immediately exit the programming mode. Or after you learn all the channels, turn valet switch “on/off” the system will exit programming mode, this is also indicated by a long chirp from the siren. 1. Enter the programming mode: First the system should be in disarm condition, set dipswitch no 8 to on position then turn the ignition switch to on/off three times. You will hear one chirp, one flash sequence from the LED, indicating the system is ready to accept programming channel 1 or arm/disarm and panic function. 2. Programing the Transmitter Codes: a) Channel 1 programming (for arm/disarm) Press one of the buttons as you like as button 1 until the alarm gives you a confirmation chirp. You can program up to 4 transmitters in channel 1. b) Channel 2 programming (for trunk release) after programming channel 1 turn the valet switch on/off there will be one chirp and two flash sequences from the LED. Indicating the system is ready to accept programming channel 2. Press btn II to program channel 2. Programing procedure is the same as programming channel 1. c) Channel 3 programming (for channel 3) after programming channel 2. Turn the valet switch on/off there will be one chirp and three flash sequences from the LED. Indicating the system is ready to accept programming channel 3. Press btn III to program channel 3. Programming procedure is the same as programming channel 1. d) Channel 4 programming (for car locator) after programming channel 3. Turn the valet switch on/off there will be one chirp and four flash sequence for the LED indicating the system is ready to accept programming channel 4. Press btn IV to program channel 4. Programming procedure is the same as programming channel 1. Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store. Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u). 100% Guarantee Remote Shipping / Return Policy Warranty/Returns: 1. We have a 30 day return policy. 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system. . . . . Powered by The free listing tool. List your items fast and easy and manage your active items. . . . . . . . . . . . . . . . .

Price: 40.79 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-02-02T18:26:55.000Z

Shipping Cost: 6.96 USD