Jetco NAVIGATOR PLAN + PATTERNS & CONSTRUCTION ARTICLE for 52" RC Model Seaplane

Description: Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE I AM NOT SELLING A KIT, only new, full-size copies of BOTH the Jetco kit and magazine PLANS (with all parts patterns) to build a 52" span NAVIGATOR RC amphibian model. The NAVIGATOR by famed designer Don McGovern, editor of Flying Models magazine, is a beautiful RC amphibian design. It has a 52" span and has a power pod over the wings that will hold a TD .049 or something similar in electric power. It was also made into a kit. This is a copy of my own kit PLAN plus the building instruction sheet. Most of the patterns are on the plan except for the center wing ribs over the cabin. I also include an additional full-size PLAN of the original NAVIGATOR by Don McGovern which was published in a model magazine. This PLAN has additional parts patterns that are not shown on the Jetco plan. This is the plan from which the kit was made. So, you will have two sets of PLANS + a copy of the construction article, + the instruction sheet. As I BONUS I include a copy of Peter Kraus’ NAVIGATOR kit review. I AM NOT SELLING A KIT, only new, full-size copies of BOTH the Jetco kit & the magazine PLANS. YOU ARE PURCHASING NICE, CLEAN, WHITE, FULL-SIZE PERSONAL COPIES OF BOTH THE MAGAZINE PLAN AND CONSTRUCTION ARTICLE, THE KIT PLAN AND THE KIT INSTRUCTION SHEET, + BONUS KIT REVIEW FOR THIS RC MODEL, FOLDED AND IN A MANILA ENVELOPE.

Price: 24.95 USD

Location: Birmingham, Alabama

End Time: 2024-03-20T18:14:02.000Z

Shipping Cost: 5.5 USD