Jconcepts 0473L 1968 Pontiac Firebird 2 (FB2) 1/10 Drag Racing Clear Body

Description: Jconcepts 0473L 1968 Pontiac Firebird 2 (FB2) 1/10 Drag Racing Clear Body Item #: JCO0473L Item Condition: Brand New in Factory Packaging Manufacturer: JConcepts Warranty: Full Manufacturer Warranty. Authorized Dealer Shipping Time: In Stock Ships Within 24hrs Item Description Jconcepts 0473L 1968 Pontiac Firebird 2 (FB2) 1/10 Drag Racing Clear Body 1968 Pontiac Firebird 2 (FB2), 1/10 Drag Racing Clear Body JConcepts has added several new features to their popular "The Machine" 1968 Firebird body to create this performance-oriented Firebird 2 (FB2) body shell. This body shell exudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter, and crowned hood line. The Firebird has a long silhouette, creating an even displacement of downforce over the front and rear end, helping the chassis gain grip where needed. The large, lay-down front windshield cuts through the wind like a fighter jet, allowing the car to gain speed quickly. The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the "big end" of the racetrack, with just enough clearance to fit over most front suspension components. On the Firebird 2, JConcepts has added more clearance in the hood area to allow a lower-profile stance, additional tire clearance, and a more uniform panel for less air disturbance. A slight hood-scoop runs the centerline of the body over the crowned hood. The Pro-Mod front-end look is completed by adding included headlight, grille, and duct decals. Trim to the lowest cutline to allow the built-in splitter to cut through the air with precision. Small wheel wells reduce large gaps around the tires, and an ultra-low cutline on the rocker panel area allows the body to hug the ground. A wider rear-end provides more clearance for an assortment of tire combinations or wider track width vehicles. The final feature, the long roofline, extended to the trunk section, blends into a built-in gurney type wing for downforce without adding additional wings or aerodynamics. The side-dam plates have been realigned in a more parallel fashion for less overall drag and to provide a better base for after-market (not included) rear wing sets. Perhaps one of the greatest features of the FB2 is the use of light-weight materials. Racers have asked for a lighter overall weight and JConcepts delivers with material usually reserved for only the highest performance on-road vehicles. The FB2, comes standard as lightweight, and shaves off approximately 3% over the previous generation. The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep, and a detailed Pontiac Firebird / JConcepts decal sheet. Body is sold clear. Shown painted for display purposes only. Features:Officially licensed by GM to JConceptsRevised FB2 styling, more clearance, deeper draw, light-weight materialsBody measures 11.00" in width and 13" wheelbaseFits a variety of platforms including DR10, DR10M, Losi 22S, Drag Slash, GFRP, and R1 custom chassisScale inspired body, cab, and window design1:1 headlight and grill treatment ============================================== Shipping Terms All orders are shipped within 24hrs (M-Sat) The tracking number will be uploaded to eBay after the item is shipped. International buyers, please read this before buying any item from us: Any order shipped outside of the USA is sent using the United States Postal Service Parcel Post Service. Once shipped the average delivery time is estimated at 10-21 working days. However, sometimes there are delays caused by the US Postal Service and international customs agents that are outside of our control. Although rare, these delays can cause shipments to take several weeks before they arrive at their destination. Returns Policy As an authorized dealer everything we sell is fully covered by a manufactured warranty. You can return any item in Brand New/unopened condition (within 30 days). Please get in touch with us before any returns. Jconcepts 0473L 1968 Pontiac Firebird 2 (FB2) 1/10 Drag Racing Clear Body Item #: JCO0473L Item Condition: Brand New in Factory Packaging Manufacturer: JConcepts Warranty: Full Manufacturer Warranty. Authorized Dealer Shipping Time: In Stock Ships Within 24hrs Item Description Jconcepts 0473L 1968 Pontiac Firebird 2 (FB2) 1/10 Drag Racing Clear Body 1968 Pontiac Firebird 2 (FB2), 1/10 Drag Racing Clear Body JConcepts has added several new features to their popular "The Machine" 1968 Firebird body to create this performance-oriented Firebird 2 (FB2) body shell. This body shell exudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter, and crowned hood line. The Firebird has a long silhouette, creating an even displacement of downforce over the front and rear end, helping the chassis gain grip where needed. The large, lay-down front windshield cuts through the wind like a fighter jet, allowing the car to gain speed quickly. The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the "big end" of the racetrack, with just enough clearance to fit over most front suspension components. On the Firebird 2, JConcepts has added more clearance in the hood area to allow a lower-profile stance, additional tire clearance, and a more uniform panel for less air disturbance. A slight hood-scoop runs the centerline of the body over the crowned hood. The Pro-Mod front-end look is completed by adding included headlight, grille, and duct decals. Trim to the lowest cutline to allow the built-in splitter to cut through the air with precision. Small wheel wells reduce large gaps around the tires, and an ultra-low cutline on the rocker panel area allows the body to hug the ground. A wider rear-end provides more clearance for an assortment of tire combinations or wider track width vehicles. The final feature, the long roofline, extended to the trunk section, blends into a built-in gurney type wing for downforce without adding additional wings or aerodynamics. The side-dam plates have been realigned in a more parallel fashion for less overall drag and to provide a better base for after-market (not included) rear wing sets. Perhaps one of the greatest features of the FB2 is the use of light-weight materials. Racers have asked for a lighter overall weight and JConcepts delivers with material usually reserved for only the highest performance on-road vehicles. The FB2, comes standard as lightweight, and shaves off approximately 3% over the previous generation. The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep, and a detailed Pontiac Firebird / JConcepts decal sheet. Body is sold clear. Shown painted for display purposes only. Features:Officially licensed by GM to JConceptsRevised FB2 styling, more clearance, deeper draw, light-weight materialsBody measures 11.00" in width and 13" wheelbaseFits a variety of platforms including DR10, DR10M, Losi 22S, Drag Slash, GFRP, and R1 custom chassisScale inspired body, cab, and window design1:1 headlight and grill treatment ============================================== Shipping Terms All orders are shipped within 24hrs (M-Sat) The tracking number will be uploaded to eBay after the item is shipped. International buyers, please read this before buying any item from us: Any order shipped outside of the USA is sent using the United States Postal Service Parcel Post Service. Once shipped the average delivery time is estimated at 10-21 working days. However, sometimes there are delays causéd by the US Postal Service and international customs agents that are outside of our control. Although rare, these delays can cause shipments to take several weeks before they arrive at their destination. Returns Policy As an authorized dealer everything we sell is fully covered by a manufactured warranty. You can return any item in Brand New/unopened condition (within 30 days). Please get in touch with us before any returns. × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © My Store Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 51 USD

Location: Mahwah, New Jersey

End Time: 2025-02-06T06:02:02.000Z

Shipping Cost: 14.95 USD