Description: The Inception Designs WGP Autococker Trident Delrin Bolt Assembly utilizes all of the learning from Paintball's history and incorporates it all into one new product. This bolt utilizes a three-port face design with an anti-stack-clipping chamfered front which helps reduce barrel breaks, especially with the small paint we so often see nowadays. This bolt has a front sealing o-ring and both valve port o-rings making it extremely efficient. The bolt comes with two sets of o-rings (three o-rings in each set) for easy matching to your gun's bore. The smaller o-rings are mainly for older generation guns, and the larger o-rings are for more modern guns like our Retro series or AKA guns. The harder o-ring goes on the bolt tip and the softer o-rings are on either side of the valve port. The Bolt is made from lightweight delrin which is self-lubricating. It is also turned and milled with slots to reduce weight and friction in the bolt bore. The gas port is enlarged to work with every variation of gun body, new, old, and from many different manufacturers. The three large gas transfer ports are designed to maximize your velocity, consistency, and efficiency whilst keeping blowback to a minimum. The bolt has a timing hole for Allen key clearance which means you do not have to remove the bolt to adjust your hammer lug. A lightweight Delrin bolt pin is included with the full-body bolt. It comes with everything needed for immediate installation and use. The bolt has side bolt pin holes only, They will not work with a top-located bolt pin. Ball detent slots are milled on both sides of the bolt for compatibility with all detent types.
Price: 69.95 USD
Location: Torrance, California
End Time: 2025-02-06T20:05:39.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Inception Designs
Type: Delrin Bolt
Model: Evolution
MPN: CGP-0116-FB
Country/Region of Manufacture: United States
Suitable For: Paintball
