iCharger X8

Description: iCharger X8 The Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger features 8S capabilities and up to 1100W of power and up to 30 Amps of charge current. Features: X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A. X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb batteries. With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.) Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed. Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature. This charger can save 32 parameters sets and support the data import/export to SD card. A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc. Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge. Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery. X8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc. Supports upgrading the hardware program by USB port or SD card. X8 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it. Specifications: Display: 2.4 " IPS LCD (320×240) Net weight: 200g Dimension: 97.5×64.5×37 ±0.5mm Input voltage range: 9—49VDC Maximum input current limit: <35A Maximum charge/discharge current: 30A Maximum charge power capacity: 1100W Maximum discharge power capacity: 50W Maximum regenerative discharge power capacity: 1100W Maximum extra discharge power capacity: 1000W @33.5V/30A Maximum current drain for balancing: >2.0A The Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger features 8S capabilities and up to 1100W of power and up to 30 Amps of charge current. Features: X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A. X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb batteries. With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.) Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed. Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature. This charger can save 32 parameters sets and support the data import/export to SD card. A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc. Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge. Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery. X8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc. Supports upgrading the hardware program by USB port or SD card. X8 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it. Specifications: Display: 2.4 " IPS LCD (320×240) Net weight: 200g Dimension: 97.5×64.5×37 ±0.5mm Input voltage range: 9—49VDC Maximum input current limit: <35A Maximum charge/discharge current: 30A Maximum charge power capacity: 1100W Maximum discharge power capacity: 50W Maximum regenerative discharge power capacity: 1100W Maximum extra discharge power capacity: 1000W @33.5V/30A Maximum current drain for balancing: >2.0A We only accept PayPal on eBay, this means you can rest assured your order will be with you ASAP after your purchase. For your security we only despatch your order to the address you provide us via PayPal. As soon as you pay, eBay & PayPal will email you to let you know it's been received and as soon as we've shipped your order, we'll let you know by email that it has been despatched and the tracking number if applicable. "We want you to be 100% happy with your purchase and offer a 14 day "no quibble" guarantee" If you change your mind, or the purchase is not suitable, you may notify us to cancel the contract within 14 days after the day of receipt of item(s) and you have a duty to take reasonable care of the item(s) until we receive the item(s) back. Return posting costs will be at your expense. Any Questions? Please check this listing page carefully as the answer is usually there. If not, let us know and we'll try our hardest to reply within one working day. "" ( ) "" ( ) "" ( ) "" ( ) "" ( ) 4.0 2548 28084 helidirectrc 20-10-2017 18:29:12 20-10-2017 18:29:12 Protect Your Product With a Consumer Priority Service Warranty eBay integration by

Price: 149 USD

Location: Middletown, Indiana

End Time: 2024-03-15T13:50:38.000Z

Shipping Cost: N/A USD