Description: HPC DP-7B Locksmith Door/Nose Puller Kit for Safe Deposit Boxes & Padlock Cores EUC If the lock core has been pulled and the use of the guard key has not opened the door, then it is time to apply the DP-7B Door Puller Set. Place the stepped Spacer Block onto the hook unit. The 3 different diameter steps of .345″ (2.15cm), .562″ (1.43cm) and .680″ (1.73cm) make it adaptable to 3 different sizes of plug holes. Place the correct diameter step into the hole. Have the hook end set against the inside back wall of the door, then tighten the knurled nut to hold the hook in place. The flat surface on the outside of the hook unit should be in a level position. The long flat blade is then fitted onto the holding slot, along with the remainder of the Puller unit, as shown above. Position feet away from the centers of adjacent doors, to minimize the possibility of distortion. The knurled knob is then turned until the door is pulled out. **What you see, is what is included, outside of case shows scratches & wear as typical with this type of previously owned product.***Please carefully review the full item description and ensure you read the disclaimer, located in "Item description from the seller," before making a purchase. Examine the photos closely and verify any flaws or concerns shown in photos to ensure this meets your needs.Thoroughly read the disclaimer disclosure prior to sending offers, placing bids on auctions, or completing purchases. For any questions or clarifications, scroll down and click the [Contact Seller] button.”
Price: 249.45 USD
Location: Indianapolis, Indiana
End Time: 2024-11-17T20:20:32.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States