Description: Holybro PM07-12S Power Module 2S-12S With 80mm XT60 Connector Wire For Pixhawk 6C和Pixhawk 4 PM07-12S Power ModuleDescription:This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal distribution for up to 8 ESCs. It is designed specifically for flight controller that do not have built-in servo header pins like the Pixhawk 6C & Pixhawk 4. It comes with pre-soldered wires, capacitor, and XT60 connector.Specifications：Input voltage: 2S-12SPCB Cont. Current Rating: 90APCB Burst Current Rating: 140A (<60 Sec)Output: DC 5.2V & 3A Max Voltage Divider: 18.182Amperes per Volt: 36.364 Please Note: - The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burstcurrent (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. - This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Mechanical Specification:Dimensions:68*50*10 mmMounting Holes:45*45mmWeight: 47.5gSetup guide for PX4 & Ardupilot can be found in the Holybro Doc here.PM07 User guide can be found herePackage Include:1x PM07 board1x 80mm XT60 connector wire (installed)1x Electrolytic capacito: 220uF 63V (installed)2x JST GH 10P Cable1x JST GH 8P Cable2x JST GH 6P Cable
Price: 62.09 USD
Location: 深圳
End Time: 2024-10-12T10:44:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Holybro
Color: Black
Compatible Brand: Universal
Compatible Fuel Type: Electric
Custom Bundle: No
MPN: Does Not Apply
Type: Power Module
