Description: Description Holybro Pixhawk 6C Mini Flight Control Module + PM02 Power Module + M10 GPS Module for PX4 RC UAV Opensource Controller Difference between Pixhawk 6C and Pixhawk 6C Mini: Ports: These ports are unavailable in Pixhawk 6C Mini (compared to standard Pixhawk 6C): - Power 2 port - Telem3 port - SBUS port - IO Debugging port - 4Pin USB port - FMU PWM CH7 and CH8 PWM Connector: - Built-in PWM connector for Pixhawk 6C Mini, while independent PWM distribution board for standard Pixhawk 6C. Description: - The Pixhawk 6C Mini is the latest update to the successful family of Pixhawk flight controllers, based on the Pixhawk FMUv6C Open Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk 6C. Compared to the standard Pixhawk 6C, this Mini version has a built-in PWM header, and some ports have been removed in order to fit this Mini form factor. - Inside the Pixhawk 6C Mini, you can find an STMicroelectronics-based STM32H743, paired with sensor technology for Bosch & InvenSense, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. - The Pixhawk 6C Mini's H7 microcontroller contains the Arm Cortex-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. - The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. - The Pixhawk 6C Mini is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications. Key Design Points: - High performance STM32H743 processor with more computing power & RAM. - New cost-effective design in a small form factor. - IMU redundancy with sensor technology for Bosch & InvenSense. - Integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings. - IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs. Specification: Processor and Sensor: - FMU processor: STM32H743, 32bit ARM for Cortex-M7, 480MHz, 2MB memory, 1MB SRAM - IO processor: STM32F103, 32bit ARM for Cortex-M3, 72MHz, 64KB SRAM - Onboard sensor: Accelerator/gyroscope: ICM-42688-P Accelerator/gyroscope: BMI055 Mag: IST8310 Barometer: MS5611 Electrical Data: - Voltage ratings: Max input voltage: 6V USB power input: 4.75 ~ 5.25V Servo rail input: 0 ~ 36V - Current ratings: TELEM1 max output current limiter: 1A All other port combined output current limiter: 1A Mechanical Data: - Working temperature: -40℃ to 85℃ - Dimensions: 53.3 x 39 x 16.2mm - Weight: 39.2g Interfaces: - 14 PWM servo outputs (8 from IO, 6 from FMU) - 2 universal serial ports: Telem1 - full flow control, independent 1.5A current limit Telem2 - full flow control - 2 GPS ports: GPS1 - full GPS port (GPS + safety switch) GPS2 - basic GPS port - 1 I2C ports: support for the dedicated I2C standard EEPROM on sensor module - 2 x CAN bus - FMU Debug (Pixhawk Debug Mini) - Dedicated R/C input, used for Spektrum/DSM and S.BUS, CPPM, analog/PWM RSSI - 1 x power supply input port (analog) Package Included: - 1 x Flight Control - 1 x PM02 Power Module - 1 x M10 GPS - 1 x Accessory Pack Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping.Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
Price: 219.79 USD
Location: Shenzhen
End Time: 2024-09-22T06:00:50.000Z
Shipping Cost: 3 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Holybro
Type: Holybro Pixhawk 6C Mini Flight Control Module
Model: Pixhawk 6C
MPN: Does not apply
Country/Region of Manufacture: China