High Contrast Split Image Focusing Screen for Olympus E400 E410 E420 E520 E620

Description: The high-contrast GF screen is slightly darker, and there is also an AF focus screen with the same brightness as the original. When taking a picture, you can explain to the store which one you need. Manual focus GF screen is better, for autofocus, AF screen is better. [High Contrast] Pure matte (Fresnel) focus screen, model: [GF]. 1. There are horizontal and vertical lines on the screen similar to the structure of Jiugongge, providing composition assistance. Manually pair When focusing, the contrast is higher than the original screen of the digital machine, the contrast between virtual and real is stronger, and it can feel subtle Due to changes in focus clarity, it is easier to focus manually. This structure and feature Sex, compared with the original screen, the brightness will decrease slightly, but the impact is not big All acceptable. Applicable situation: 1. The original screen is broken and needs to be replaced. 2. If the maximum aperture of the lens is less than F5.6 and above, the split image micro-edge screen cannot be used I also want to improve the accuracy of manual focusing. Accessories: Send installation tools, gloves, tweezers. Please do not use detergents such as alcohol, which will damage the focus screen. If there is dust on the focus screen, please clean it up with tools such as a blow, chip-free paper, and low-adhesive tape! Please wash off the talc powder on your finger cover before installation! < Figure 1 > The camera that appears this time is the PENTAX K100D < Figure 2 > Please put the camera upside down and look at the internal structure of the focus screen through the mirror < Figure 3 > This is an enlarged picture, please pay attention to the arrow, you can clearly see a switch card lock that turns on the focus screen. < Figure 4 > As long as the card damage is hooked and pulled to the outside, the spring pressing sheet can be opened. < Figure 5 > After opening it, it looks like < Figure 6 > Open the spring leaf with the finger of the left hand, and carefully take out the original focusing screen with the tweezers in the right hand < Figure 7 > Take it out < Figure 8 > In fact, the steps to put it back only need to be the opposite of the steps to take it out and put it in. < Figure 9 > One forceps holds the pressure ring of the focus screen, and the other plastic forceps holds the focus screen and puts it in < Figure 10 > Then use your finger wearing a finger cover to press down the card lock on the focus screen frame, it will get stuck, and the installation is complete!

Price: 38.92 USD

Location: Shenzhen

End Time: 2024-12-04T09:31:30.000Z

Shipping Cost: 0 USD