Hayabusa DME Swingarm Red Chrome Powder Coat Drag Racing

Description: For sale is a used Hayabusa Gen 2 DME aluminum extended swingarm for standard width wheel. This was powder coated a red chrome but is not actual chrome and is powder coated to mimic a red chrome. Swingarm has about 1000 miles on it. No damage but does have normal wear as shown in the pics mostly from wheel changes and moving the wheel back and forth on the swingarm and some road wear. Most wear cannot be seen once installed but this is used and not perfect. Was made with a chain roller, ultralight end blocks, underbracing, air tank, nitrous bracket and tab, swingarm spools, 5.5 inch of adjustment, etc. There are 2 sets of holes drilled and tapped 1/4-20 for tire hugger mounts and brackets for clips for wiring and hoses. Drilled at the 6 over and 10 over extension. In the pics i put black bolts in those holes. As with all DME swingarms you will need to use your swingarm mount bolt dust seals and your rear bearing from the cushion lever from your old oem swingarm. That is a steel tube you will need to remove from your swingarm. Here is the part number 62626-33D00. The swingarm bearings are good and ready to use. I added a pic of the oem swingarm compared to the extended DME swingarm. You can get approximately 9.5 inches over stock length. In the pics you will see a silver tube. I added in a stainless steel tube between the 2 supports which is only siliconed in place to protect the bearings from dust. Not sure why DME leaves those 2 bearings exposed. Not visible once installed on the bike. I added in a few pics of what it looks like installed but the bike is not included. These pics show it with a stock length tail which does work. I have a 10 over tail i would be willing to sell separately that is painted metallic gray. The end blocks in the pics are not powder coated but with the auction you get the powder coated end blocks. Also comes with a custom made coremoto red rear brake hose. I added in a pic of how to route the red rear brake hose. Comes with the rear speed sensor ABS extension wire. I do not ship internationally or through a freight forwarding company. I research all addresses before i ship out. Do not use a freight forwarding company or the sale will be cancelled. No returns

Price: 799 USD

Location: Wentzville, Missouri

End Time: 2025-02-04T16:33:47.000Z

Shipping Cost: 120 USD