Gunstock Carving and Reproducing of any Stock

Description: Carvermaster Manufacturers of Carving Duplicators CARVERMASTER.C0M Model One Complete w/ Bits This is a fine machine for duplicating gunstocks, plus a wide range of other items. Will carve grips, Rifle stocks, shotgun stocks and forearms... anything that will fit within the dimensions of 8" in diameter x any length. As it comes standard, it will carve up to 35" long, and the length can be easily extended. Accurate to within .005 inch, will carve an item to where just a light sanding is needed to finish. The original stock is held in place on a rotating mechanism, while a new blank of wood is mounted on the other side. A stylus traces over the original and a high speed cutting bit carves the new stock. Simple to set up and operate, the Duplicator is very forgiving and easy to operate. Built from welded steel, will last forever, and every machine comes with an unconditional lifetime warranty. This is our standard model of gunstock carver, and is the choice of Gunsmiths around the world. Ships to international locations as a "welded steel tool". Sets up on a flat wood surface that can be as simple as a piece of plywood. Comes with easy to follow instructions for setup and operating, along with a source of suppliers for replacement cutting bits. Includes a nice selection of cutting bits, each with a stylus to match. The only thing needed is the router, which you purchase yourself. Uses the Bosch Colt 1 HP router (priced at under $125). In Australia and the Pacific rim, uses the Bosch GMR-1, and in the UK and Europe, uses the GKF-600. Feel free to call if you have questions, or particular requirements. See our site for a wide range of models to suit any needs that you might have. Feel free to call with your questions.

Price: 1185 USD

Location: Belen, New Mexico

End Time: 2024-09-09T12:00:01.000Z

Shipping Cost: 0 USD