GET BOTH! MAX FLOW +25% Transfer Port + Port Gasket Seal for Crosman 2240 1322

Description: Visit My eBay Store: AlchemyAirWerksYou saw it here first! Another Alchemy AirWerks Innovative Part (though now being flatteringly duplicated by others) MAX FLOW +25% BOSS Metal Transfer PLUS OEM PORT SEAL GASKET(BOTH PARTS 34 AND 35 ON THE 1ST PICTURE / DRAWING)for Crosman 2240 1377 1322 PC77 2300 2400 362 BACKPACKER DRIFTER etc. INCREASES TRANSFER AREA 25% NOTE: WILL NOT FIT MEDALIST OR REAR COCKING 13XX MODELS. This Customized BOSS transfer port and its OEM port seal gasket is NOT ONLY UNRESTRICTED, it is OPENED UP over 25% (ID surface area).Lets not be confused by others claming 25% WIDER! That would never work or fit at all. It is the surface area of the ID that is increased by 25%.The Canadian and UK guns have restricted (smaller ID) transfer ports to lower the power of the guns to 6 fpe or less.US stock transfer ports are about .140 ID and compared to the Canadian/UK guns, we call this unrestricted in comparison.This transfer port is not only unrestricted, it is opened up to about .158 (which is an increase in ID area of over 25%).Don't worry, the outer dimensions remain the same, so it will fit the transfer port gasket and the barrel port the same as a stock unit. Also, even though we have opened it up significantly, it is not so much that it weakens the strength / integrity of the transfer port. These will work just fine in a stock gun (with stock valve) and will help a bit with CO2 / air flow (if the transfer port is a weak link in your gun's transfer system. It certainly will not hurt.These will combine nicely with your BOSS or BOSS RP valves in ensuring (again) that the stock transfer port is not a pinch point or can help the increased flow transfer from these HOT valves.I see some call it a tube connector, but this is the metal transfer port that IS between the tube and the barrel to channel the CO2 from the valve to the barrel. These customized Crosman parts are freshly new (not old stock) and have never been used or installed. They have been modified only as described.These parts are completely ready for you to install into your Crosman pellet pistol or carbine. With every order, I will ship same day or the next business day. Your order will have a tracking number as well.Feel free to email me any questions you may have.Please bid confidently. Excellent customer service has always been my most important goal. My feedback backs that up (and will continue to)._____________________________________________This is an Approved Item for sale per eBay Policy: *** PLEASE DO NOT REMOVE THIS LISTING *** This Item is for Air Gun Use Only... Not for Firearms_____________________________________________

Price: 18.44 USD

Location: Leesburg, Georgia

End Time: 2024-10-05T02:01:27.000Z

Shipping Cost: 4 USD