GEPRC Cinebot25 S FPV Racing Drone Receiver G4 Flight Control for SPEEDX2 Motor

Description: Description GEPRC Cinebot25 S FPV Racing Drone Receiver G4 Flight Control for SPEEDX2 1505 4300KV Motor Description: - Cinebot25 is a model that possesses unparalleled controllability and steady aerial footage shooting capability. It will debut with a revolutionary external design and unbelievable performance. - Cinebot25 comes with two different options for the power version. They are the regular version with the SPEEDX2 1404 motor and the S(sport) version with the SPEEDX2 1505 motor. - The O3 anti-shake design applies four silicone damping balls to reduce vibration and filter jello, providing high-performance videos. The integrated structure adopts revolutionary modified materials to satisfy the need for rigidity and flexibility, reducing the possibility of damage to a minimum. The fuselage space is highly compatible with various video transmission systems like the O3 Air Unit, and it is equipped with a convenient outlet to make the use of the SD card slot and USB faster and more effective. - After a host of testing on parameters, Cinebot25 adopts a TAKER G4 45A AIO FC that will breathe new life into the footage-shooting experience. Features: - Integrated external design. Equipped with reinforced carbon plate and modified material for one-piece injection molding at the bottom. - The shock-absorbing protection cover of the camera provides better stability for footage shooting. - Two power versions are available: the regular one with SPEEDX2 1404 motor and the superior one with SPEEDX2 1505 motor. - The TYPE-C and BOOT button on the rear makes parameter adjustment convenient. - Optimized silicone T-shaped antenna fixing component. - Cinebot25 Lite quadcopter equipped with a LiHV 4S 720mAh battery that weighs less than 250g. - Equipped with the new TAKER G4 45A AIO, the G4 FC has a stable flight computing capability. An integrated 45A BL32 ESC possesses strong discharge capability that supports a refresh rate of up to 128K PWM. - The compatibility between O3 VTX and Cabinet makes the installation of memory cards and footage loading easier. - The customized fixing stand of the receiver simplifies the internal space. - Diversify the selectivity of the battery with the comprehensive fixing method of aluminum components and straps. Cinebot25 S WTFPV Quadcopter Specification: - Model: Cinebot25 S WTFPV Quadcopter - Frame: GEP-CT25 Black - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyro: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1505 4300KV - Propellers: HQprop DT63mm x 4 - Connector: XT30 - VTX: None - Camera: None - Antenna: None - Receiver: PNP(internal VTX receiver) / ELRS2.4G / TBS Nano RX - Weight: Cinebot25 S WTFPV PNP version 145g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5’-7’30” (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 S quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x O3 Heat sink - 1 x 19*19mm lens cover - 2 x O3 antenna extension cords - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Cinebot25 S Wasp Quadcopter Specification: - Model: Cinebot25 S Wasp Quadcopter - Frame: GEP-CT25 Black - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyroscope: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1505 4300KV - Propellers: HQprop DT63mm x 4 - Connector: XT30 - VTX: Runcam Link - Camera: Runcam Wasp - Antenna: Peano 5.8G LHCP UFL - Receiver: PNP (internal VTX receiver) / ELRS2.4G / TBS Nano RX - Weight: Cinebot25 S Wasp PNP version 180g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5’-7’30” (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 S quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Cinebot25 S O3 Quadcopter Specification: - Model: Cinebot25 S O3 Quadcopter - Frame: GEP-CT25 Black - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyro: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1505 4300KV - Propellers: HQprop DT63mm x4 - Connector: XT30 - VTX: O3 AIR Unit - Camera: O3 camera - Antenna: O3 original antenna - Receiver: PNP(internal VTX receiver) / ELRS2.4G / TBS NanoRX - Weight: Cinebot25 S O3 (PNP version) 192.75g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5’-7’30” (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 S quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Cinebot25 Wasp Quadcopter Specification: - Model: Cinebot25 Wasp Quadcopter - Frame: GEP-CT25 Grey - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyro: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1404 4600KV - Propellers: HQprop DT63mm x 4 - Connector: XT30 - VTX: O3 Air Unit/Wasp/WTFPV (without VTX) - Camera: O3/Wasp/without camera - Antenna: for Peano 5.8G LHCP UFL - Receiver: PNP(internal HD VTX receiver) / ELRS2.4G / TBS Nano RX - Weight: Cinebot25 Wasp PNP version 170g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5’-8' (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x O3 heat sink - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Cinebot25 Wasp Quadcopter Specification: - Model: Cinebot25 Wasp Quadcopter - Frame: GEP-CT25 Grey - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyro: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1404 4600KV - Propellers: HQprop DT63mm x 4 - Connector: XT30 - VTX: O3 Air Unit/Wasp/WTFPV (without VTX) - Camera: O3/Wasp/without camera - Antenna: for Peano 5.8G LHCP UFL - Receiver: PNP(internal HD VTX receiver) / ELRS2.4G / TBS Nano RX - Weight: Cinebot25 Wasp PNP version 170g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5’-8' (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x O3 heat sink - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Cinebot25 Wasp Quadcopter Specification: - Model: Cinebot25 Wasp Quadcopter - Frame: GEP-CT25 Grey - Wheelbase: 115mm - FC: TAKER G4 45A AIO - MCU: STM32G473CEU6 - Gyro: ICM 42688-P - FC firmware: TAKERG4AIO - ESC: BLHeli 32Bit 45A - Motor: SPEEDX2 1404 4600KV - Propellers: HQprop DT63mm x 4 - Connector: XT30 - VTX: O3 Air Unit/Wasp/WTFPV (without VTX) - Camera: O3/Wasp/without camera - Antenna: for Peano 5.8G LHCP UFL - Receiver: PNP(internal HD VTX receiver) / ELRS2.4G / TBS Nano RX - Weight: Cinebot25 Wasp PNP version 170g±1g - Recommended battery: LiHV 4S 660mAh-720mAh - Flight Time: 5'-8' (The reference time is based on low-speed flight. The actual time depends on individuals’ flying methods.) Package Included: - 1 x Cinebot25 quadcopter - 1 x HQprop DT63mmx4 propeller (pack) - 2 x Battery anti-slip pads - 1 x 15*150mm battery strap - 1 x 15*180mm battery strap - 1 x Naked FPV base - 1 x O3 heat sink - 1 x Reserved screw pack - 1 x L-shaped screwdriver 1.5mm - 1 x Frequency paring pointer - 1 x Damping ball puncher Note: - Battery is not included. Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping.Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. On Mar 29, 2024 at 03:22:08 PDT, seller added the following information:

Price: 197.56 USD

Location: Shenzhen

End Time: 2024-12-29T10:09:19.000Z

Shipping Cost: 8 USD