GenExhaust Universal Generator 1-1/2" quick disconnect exhaust extension (4 ft)

Description: This exhaust extension allows for safe venting of exhaust fumes from an unoccupied enclosed area – this will allow your expensive unit to stay dry and secure while maintaining portability.This adapter is designed for use on stock muffler ports that are less than 15/16 inch (24 mm) diameter, weld bead diameter under 1 inch (25-1/2 mm) and length of less than 1 inch (25-1/2 mm) long. See pictures for further explanation. All dimensions are with the spark arrester removed. The spark arrester will have to be permanently removed for this modification.The buyer will receive: a universal (see spec requirements below) custom low profile exhaust stub, quick disconnect fittings, a custom stub to hose adapter, the specified length of 500 degree F rated 1-1/2” I.D. indoor/outdoor flexible duct hose, and the proper size stainless hose clamp. The exhaust stub will need to be welded onto the generator's stock muffler and the spark arrestor screens permanently removed. A mechanic/exhaust/muffler auto repair shop can typically perform the weld if you are not able. Illustrated instructions will be provided. Custom hose size/length and exhaust stubs are available. The hose can be used to run exhaust into water for additional sound deadening, or through the wall of your generator enclosure. Thank you for looking!I ship quickly (typically the next business day) after order is received. Please check out my seller feedback as I strive to provide a top quality solution and customer support with fast delivery.http://stores.ebay.com/cubstman1998 For thru wall kits, see: http://stores.ebay.com/cubstman1998/Thru-wall-kits-/_i.html?_fsub=25538099011

Price: 121 USD

Location: Roann, Indiana

End Time: 2024-10-11T15:16:28.000Z

Shipping Cost: 0 USD