La Milano

Geeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor Device

Description: Tips: 1. Please read this manual carefully for using GLA10 correctly. 2. Please scan the QR code or log in to our website to get the G-code file that GLA10 needs. 3. Please pay attention to safety when leveling the GLA10 hot bed, so as not to hurt your fingers by the moving hot end. Leveling Preparation 1. Insert the attached CR2032 battery in the battery holder on the GLA10. Please be careful not to install the wrong positive and negative poles when installing the battery. 2. Please enter the URL https://www.geeetech.com/wiki/index.php/GLA10 in the browser, or scan the QR code below to visit our website. Then download the GLA10 related G- code file. We provide the corresponding G-codes for different hotbed sizes. The files with the "Level" mark are the leveling auxiliary files, and the G-code files with the "Test" mark are the test files after the adjustment is completed. 3. Please select the correct G-code file according to the size of your 3D printer heat bed, copy the G-code to the Micro SD card and insert it into the printer. 4. Please clean up the residual filament on the nozzle so as not to affect the leveling accuracy. Start Leveling 1. Power on the 3D printer, select the leveling auxiliary G-code pre-installed in the Micro SD, and start the hotbed leveling.The leveling auxiliary G-code will pause at the four corners of the hot bed for 25s respectively. After 25s, the nozzle will move to the next point. After the pause at the fourth corners, the printer will exit the leveling. 2. After the leveling starts, the nozzle of the printer will automatically lift a certain distance. At this time, please place the end of the GLA10 with a cross pattern under the nozzle, and ensure that the nozzle is directly above the cross pattern of the GLA10. 3. At this time, please press and fix the other end of the GLA10 with one hand, and then quickly adjust the bot bed leveling nut corresponding to the current position of the nozzle with the other hand. When you see the green LED on the GLA10 just lights up, it means the current height of the hot bed is just right. Now, please take out the GLA10 and wait for the hot end moving to the next point. Pay attention that the GLA10 just lights up at all four corners of the hot bed; 4. After leveling, please use the downloaded test G-code to verify the leveling effect. 5. If any problem is found during the leveling test, please re-level the hot bed. Specification Battery parameter:CR2032,3V Product size:90(L)*35(W)*12(H)mm Packing size:18(L)*75(W)*40(H)mm Product weight:14.5g Packing weight:52g

Price: 9.99 USD

Location: Los Angeles

End Time: 2024-08-01T10:43:31.000Z

Shipping Cost: 0 USD

Product Images

Geeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor DeviceGeeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor DeviceGeeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor DeviceGeeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor DeviceGeeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor DeviceGeeetech 3D Printer GLA10 Auxiliary Leveling Tool 3D Fast Leveling Sensor Device

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Brand: Geeetech

Type: GLA10 Leveling aids

MPN: Does not apply

Color: Blue

Country/Region of Manufacture: China

Manufacturer Warranty: 3 Months

Recommended

Geeetech 3D Printer ABS+ Filament 1.75mm 1KG/roll Strong Durable Consumables
Geeetech 3D Printer ABS+ Filament 1.75mm 1KG/roll Strong Durable Consumables

$16.16

View Details
Geeetech 3D Printer MotherBoard Control Board GT2560 V4.0 for A20M From US
Geeetech 3D Printer MotherBoard Control Board GT2560 V4.0 for A20M From US

$25.64

View Details
1KG/Roll GEEETECH Silk PLA Dual Color Gradient Shiny Silky Filament Black + Red
1KG/Roll GEEETECH Silk PLA Dual Color Gradient Shiny Silky Filament Black + Red

$17.99

View Details
1kg/Roll Geeetech Filament 1.75mm PLA/PETG/TPU/ABS/Marble/Silk/Glow/Matte PLA US
1kg/Roll Geeetech Filament 1.75mm PLA/PETG/TPU/ABS/Marble/Silk/Glow/Matte PLA US

$16.19

View Details
Geeetech 3D Printer Filament, PLA 1.75mm, Glow In the Dark White, 1KG/roll NEW
Geeetech 3D Printer Filament, PLA 1.75mm, Glow In the Dark White, 1KG/roll NEW

$20.51

View Details
Geeetech 1.75mm Luminous PLA 3D Printer Filament 1kg Multicolor Glow In the Dark
Geeetech 1.75mm Luminous PLA 3D Printer Filament 1kg Multicolor Glow In the Dark

$19.66

View Details
1KG 1.75mm Regular PLA Geeetech 3D Printer PLA Filaments Precision Consumables
1KG 1.75mm Regular PLA Geeetech 3D Printer PLA Filaments Precision Consumables

$17.09

View Details
GEEETECH 3D Printer Filament Carbon Fiber PLA 1kg 1.75mm High Stiffness Filament
GEEETECH 3D Printer Filament Carbon Fiber PLA 1kg 1.75mm High Stiffness Filament

$18.44

View Details
Geeetech Matte PLA 3D Printer Filament 1.75mm 1KG Frosted Texture PLA Filament
Geeetech Matte PLA 3D Printer Filament 1.75mm 1KG Frosted Texture PLA Filament

$17.99

View Details
Geeetech A10M A20M 3D Printer Hotend Dual Extruders 2 in 1 out for 0.4mm Nozzle
Geeetech A10M A20M 3D Printer Hotend Dual Extruders 2 in 1 out for 0.4mm Nozzle

$19.99

View Details