Garrett GVW-40 External Wastegate Kit 40mm V-Band Blue Upgrade for Tial MVS 38mm

Description: --> Add to Favorites Home About Us Feedback New Arrivals Ending Soon Contact Us --> Garrett GVW-40 External Wastegate Kit 40mm V-Band Blue Upgrade for Tial MVS 38mm Description Interchangeable with Tial MV-S. Base Pressure 1 Bar / 14.5 PSI, Minimum Base Pressure 0.2 Bar / 3 PSI, Maximum Base Pressure 1.7 Bar / 25 PSI. Garrett GVW-40 External Wastegate Kit 40mm V-Band Blue Bolt on Upgrade for Tial MVS 38mm WG Note: Interchangeable with Tial MV-S. Base Pressure 1 Bar / 14.5 PSI, Minimum Base Pressure 0.2 Bar / 3 PSI, Maximum Base Pressure 1.7 Bar / 25 PSI. Car Make: Universal Manufacturer Product Specifications Garrett Vent External Wastegates regulate turbocharger shaft speed by venting exhaust gas around the turbine stage of the turbocharger. CFD optimized design maximizes flow and delivers optimum boost control. Advanced thermal optimization increases durability of the diaphragm. The cap design makes spring changes and serviceability of the entire GVW lineup easier and more reliable to perform. Features CFD tested for maximum flow and thermal efficiency Optimized actuation stability and temperature resistance for superior durability Replaceable valve and bushing components to increase service life Robust design for easy diaphragm replacement Liquid-cooled actuator ports for use on severe applications (up to 52% reduction in body temp) Anodized aluminum actuator cover Color: Blue Sizes 40mm Springs, Fittings, Flanges, and V-bands included Standard Base Pressure: 1 Bar / 14.5 PSI Maximum Base Pressure: GVW40: 25 PSI / 1.7 Bar Minimum Base Pressure: 3 PSI / 0.2 Bar Flow Data Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Here’s how the three GVW wastegate sizes flow in LBS/MIN and KG/SEC at various increments of the valve stroke. Material Data The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Valve Housing: High temp stainless steel rated up to 1050° C Diaphragm: High temp Nomex reinforced elastomer Actuator Cover: Fully-machined anodized 6061 aluminum Valve Guide | Bushing: Nitronic 60 Valve: high temp stainless steel with plated stem V-Band: CNC machined 304 stainless steel Flanges: Fully-machined 304 stainless steel Springs: 17/7 PH stainless steel Mechanical Data Garrett Vent | External Wastegates are created by the engineers that designed G-Series and GTX Gen II turbochargers. Size: 40mm Valve Diameter: 40mm Valve Mass: (40mm) 1.27kg / 45oz Max Spring Base Pressure: 1.7 bar / 25 psi (1:1 backpressure ratio) Minimum Spring Base Pressure: 0.2 bar / 3 psi (1:1 backpressure ratio) Port Fitting Air: M10x1.0 to hose barb (hose ID 6mm / .25in) Port Fitting Water: M8x1.0 to AN-3 Thermal Data When researching and testing common shortfalls of wastegates, we observed how heat cycling and normal wear can rapidly change their actuation characteristics. Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Actuation data (opening and closing) in the chart was measured before and after extreme testing conditions. Results show the heat cycled GVW product maintains linear control of the wastegate as compared to the new product. Precise actuation of the GVW provides accurate calibration settings and performance throughout the lifespan of the product. Accurate wastegates, allow for optimum performance of the turbocharger. Max Thermal Stress (non-cooled): 270°C actuator body temp during thermal cycle test Max Thermal Stress (liquid-cooled): 130°C actuator body temp during thermal cycle test Max Exhaust Temp Peak: Up to 1050°C Kit Contents GVW Wastegates include all the following parts: Springs V-Band: Inlet / Outlet Outlet Flange Inlet Flange Valve Seat Washers: M8, M10 Water Fittings Banjo Bolt and Banjo Fittings Air Plugs Wastegate Springs GVW wastegates are set to 1 Bar / 14.5 PSI of base pressure and can be configured from 0.2 Bar / 2.9 PSI – 1.7 Bar / 24.7 PSI (considering 1:1 backpressure). Use the chart to reference wastegate size and spring color to identify Garrett GVW wastegate spring pressures Please reference GVW-40 in the chart below. Wastegate Flange Specs GVW Wastegate flanges can be references in this data: GVW-40: Inlet OD 55.4mm / 2.18in, Outlet OD 48.9mm / 1.93in (Interchangeable with Tial MV-S) GVW Wastegate Placement Suggestions Wastegate placement on the exhaust manifold is a key factor in wastegate performance. The following suggestions can help identify the best choice when purchasing or fabricating an exhaust manifold for your project. The connection on the manifold greatly affects flow capability, and correct orientation of the wastegate to the manifold is essential. The ideal connection is at 45° with a smooth transition (Figure 1). Placing the wastegate at 90° to the manifold (Figure 2) will reduce flow capacity by up to 50 percent and can cause over boosting! More reduction in flow capacity will result if the wastegate is placed at angles greater than 90° (Figure3). Figures 2 and 3 greatly reduce the control you have over the system and can put your entire drive train at risk. Never mount the wastegate to the turbine housing at any time, this will reduce the performance of the turbocharger (Figure 4). Contact an authorized distributor for additional information. Wastegate Port Fittings GVW wastegates feature a water-cooling circuit which allows the product to be operated in extremely high temperature conditions while maintaining its actuation characteristics. Water-cooling symbols are etched near both of the fitting ports for easy identification. If watercooling, both ports must be used to create a coolant loop. (2) Water fittings and (2) washers are included and can be installed with a 14mm wrench or socket. There are two air ports on the top cap and three air ports on the valve body. (2) 14mm Banjo fittings with washers and (3) 5mm hex head air plugs are included. Payment Almost all of our eBay Listings are "Buy it Now" which means payment is due immediately at the time of purchase. Return Policy: We allow returns of unopened product within 30 days of the purchase date for a money-back refund. If the original packaging is missing or damaged, or if it has been longer than 30 days since you purchased the item, there may be restocking fees incurred. Please message us for a Return Authorization Number before sending anything back to avoid processing delays. --> AbouT us Real Street Performance is unlike most "Race Shops". We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses. - Best Pricing - Fast Shipping - Immediate Response Time - Experienced in International Export - 100% Positive Customer Satisfaction Feedback Rating Shipping Info WE CAN ONLY SHIP TO THE ADDRESS ENTERED DURING CHECKOUT. Most domestic orders ship within 5 days, please allow up to 7-10 days for international orders to ship. We are very familiar with International Export procedures and we ship out of the country every day. If you are a customer outside of the United States of America, have no worries, we will get your parts to you quickly and correctly, many times just as quickly as our domestic shipments. Some shipping destinations will require additional shipping, these customers will be contacted immediately after placing their order. Feel free to contact us before placing your purchase for an exact shipping quote. Import Duties, Taxes, and Charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Quoted shipping does not include insurance. If you would like to add insurance to your contact us here to go over the options. Please note that eBay requires all orders $750.00 and above to have Signature confirmation, so if your package total is $750.00 or more, your shipment will require a signature. Even though we are based in Florida, not all orders ship complete from our Florida location. Please be aware that some parts will ship directly from other states to your location. Please message us before clicking buy-now to check location availability if this is a concern of yours. PLEASE NOTE, ORDERS TO THE FOLLOWING COUNTRIES WILL BE SHIPPED VIA USPS INTERNATIONAL TO AVOID DELAYS AND COMPLICATIONS, UNLESS SPECIFICALLY REQUESTED BY THE BUYER TO SHIP VIA UPS: - Russia - Brazil - Greece Our Services --> 20,000 sqft Facility in Sanford, FL Our new facility is located in sunny Sanford Florida, but we ship all over the world every day with the most competitive rates. Useful Links Store Home About Us Feedback New Arrivals Ending Soon Contact Us Add to Favorites We Accept Payment --> Sign up to our Newsletter Add my Store to your favorites and receive my email newsletters about new items and special promotions! Subscribe Copyright © 2017 Real Street Performance. All rights reserved.

Price: 335.47 USD

Location: Sanford, Florida

End Time: 2024-12-24T19:07:31.000Z

Shipping Cost: N/A USD