Ford Ranger Mini Molle Panel - Current Model Ranger (USA MY24+, AU/NZ MY22+)

Description: Meet Mini Molle This ultra-compact mini molle panel provides a safe and secure place to mount a range of four-wheel-drive accessories and camping gear. Proudly AUSTRALIAN MADE Suitable only for Ford Ranger models without a plastic bed liner, the AusMotion Mini Molle isinstalled in less than 10 minutes using existing bolt holes, no cutting or drilling of anything is required. Shown here with an AusMotion power panel, the Mini Molle retains access to the 12V panel fitted in all Rangers of this age. Accessory Mounting Accessories,fire extinguishers, camping gear and more can be tied, bolted or otherwise attached to the panel. Items can be bolted using the equally spaced M8 bolt holes, molle holes and slots. Part of Australia’s Original Ranger Molle Panel System Our molle panel system has been around since 2020, first introduced for the PX Ranger. Manufactured from Australian Standard steel in Western Australia and powder coated in atough three stage process, this durable panel provides multiple mounting options with a series of pre-cut holes, slots and cutouts. The panels allows you to secure your 4WD and camping accessories easily in the tub, without using bulky and heavy drawer systems. Vehicle Compatibility Please read the following in full to establish if this panel is suitable for your vehicle. Suitable for the following vehicles. Ford Ranger RA Series (commonly known as Next-Gen Ranger) – July 2022 onward. Ford Ranger RA Series Raptor – July 2022 onward. Volkswagen Amarok 2023 – January 2023 onward. USA Model Ford Ranger MY24+ Not currently available for the following vehicles: Vehicles with plastic bed liner Vehicles with Ford Load Management bars (long aluminium rails that run the length of the bed on some models) Compatibility With Other 4WD Accessories Not suitable for vehicles fitted with: Bed Rug type carpet liners which have not been fitted tightly in the rear corners – If the carpet is fitted tightly, the molle panels can be installed. Swing cases. Dual battery system products that are already installed in the same part of the vehicle. Installation can be achieved on vehicles fitted with: Spray-on surface treatments (Ford/VW factory spray-in liner, Raptor Line, Line-X). UteMaster load lid – Including version with middle support leg. Full-length or half length sports bar. Maxliner Canopies ARB Canopies. Aeroklas Canopies. Flexiglass Canopies. Other canopies that are clamped to the top lip of the tub only. Tonneau covers. If in doubt,please send us a photo showing any accessories that you have fitted to this part of your vehicle Installation Notes Installation takes less than ten minutes per side. No-drill installation, using original factory holes in the body. Pre-Cut Holes Multiple holes pre-cut to suit M8 rivnuts/thread inserts (thread inserts not included). Material and Finish Structural grade, Australian Standard steel. Powder coated black.

Price: 199 AUD

Location: Hillarys, WA

End Time: 2025-02-04T09:49:39.000Z

Shipping Cost: 45.98 AUD