Description: *Compatibility Chart1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number). 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits. 3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0). Ram 1500 2014-2018 V6 3.0L Ram 1500 2013-2018 V6 3.6L Ram 1500 2013 V6 3.7L Ram 1500 2013 V8 4.7L Ram 1500 2013-2018 V8 5.7L Ram 1500 Classic 2019 V6 3.0L Ram 1500 Classic 2019-2020 V6 3.6L Ram 1500 Classic 2019-2020 V8 5.7L *Generation & Evolution: Dodge Ram PickupFirst generation(1981-1993) D/WSecond generation(1994-2002) BR/BEThird generation(2002-2009) DR/DH/D1/DC/DMFourth generation(2009-present) DS/DJ/D2Fifth generation(2019-present) DT *Removal Guideline:Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.To avoid the possibility of short circuits while working with electric components consult your owners manual on how to disconnect your battery.Consult your vehicle owners manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.1.Set steering to straight ahead. 2.Raise vehicle. 3.Remove applicable front wheel.(picture 1) 4.Loosen and remove the tie rod end nut.(picture 2) 5.Loose and remove the two sway bar end link nuts.(picture 3,4) 6.Loosen and remove the upper control arm nut.(picture 5) 7.Loosen and remove the nut and bolt from the bottom strut fork.(picture 6) 8.Loosen and remove the air fitting from the top of the strut.(picture 7) 9.Loosen and remove the three top strut mounting nuts.(picture 8) 10.Remove the strut.(picture 9) 11.Removal complete. *Installation Guideline:12.Install the new strut into the vehicle.(picture 10) 13.Install the three top strut mounting nuts and tighten to manufacturers specifications.(picture 11) 14.Remove the white shipping pin from the air strut and discard.(picture 12) 15.Remove the existing air line elbow, and then install the new elbow onto the air line.(pictures 13,14) 16.Install the air line until fully seated, pulling outward slightly to confirm engagement.(pictures 15,16) 17.Install the upper control arm nut and tighten to manufacturers specifications.(picture 17) 18.Reinstall the struts bottom nut and bolt and tighten to manufacturers specifications.19.Reinstall and tighten the two sway bar end link nuts to manufacturers specifications.20.Reinstall the tie rod end nut and tighten to manufacturers specifications.21.Re-install applicable front wheel.22.Lower vehicle.23.Installation complete. *Frequently Asked Questions:How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?An air strut with separable air springsIf your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring. A complete air suspension shockMany cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut. What is the difference between an air spring and an air strut? The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced. Which side of my car is the Right and Left? The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right. *OEM Part Number: 04877147AA, 04877147AB, 04877147AC, 04877147AD 04877147AE, 04877147AF, 04877147AG, 04877147AH *Item Specifications: Key Words: Front Pair Air Suspension Struts For Dodge Ram 1500 Limited Rebel 2013-2019 Package Includes: Pair for Front Left & Right Air Suspension Shock Struts Notes : Please double confirm the compatibility as well as the OEM number before purchasing.Instruction is not included. Professional installation is recommended. Payment 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service 3.We do not offer local pickups. 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. Contact Us We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved.
Price: 276.92 USD
Location: Ontario, California
End Time: 2025-01-13T09:28:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Superseded Part Number: 04877147AF, 04877147AC
Custom Bundle: Yes
Interchange Part Number: 04877147AG, 04877147AD
Adjustable: Yes
Size: Single Dimension(CM) 75.00(length)*20.00(width)*20.00(height)
Single Weight(KG): 6.650
Upper Mount Type: Stud
Lower Mount Type: U-Bracket
Drive Layout: Front Engine RWD/4WD
Platform: DS/DJ/D2
Features: Sealed
Manufacturer Part Number: ADP82948601S
Type: Air Suspension Strut
Included Hardware: None
Material: Iron, Aluminium Alloy, Rubber
Color: Silver
Return Policy: 30 Days Free Return
Quantity: Pair
OE Spec or Performance/Custom: OE Spec
UPC: Does not apply
Placement on Vehicle: Front
Other Part Number: 04877147
Brand: autodayplus
Fitment Type: Direct Replacement
Manufacturer Warranty: 1 Year
Feature: ESCP