Description: Fluke 87V/E2-KIT Industrial Electrician True RMS Multimeter Combo Kit; For Voltage, Current, Frequency and Capacitance Measurements for Everyday UseUPC 095969353274Fluke 87V/E2-KIT : This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, and includes special accessories to make you even more productive on the job. This kit will save over 15% compared with the individual price of all the accessories. Plus you'll be working with the most trusted tools in the world. Fluke 87V Industrial Multimeter Fluke AC220 retractable long reach alligator clips Fluke C35 lightweight soft case to provide optimal protection and storage Fluke TPAK ToolPak meter haning accessory to hold meter to steel surfaces Fluke TL224 1.5 m silicone leads resist head Fluke TP238 removable probes with 4 mm of exposed metal to use on industrial circuits 9V battery (installed) Getting Started Manual Fluke 80BK K-type temperature probe FLUKE 87V True RMS Multimeter True-RMS ac voltage and current for accurate measurements on non linear signals Selectable filter for accurate voltage and frequency measurements on motor drives 0.05 % dc accuracy 6000 counts, 3-3/4 digits FLUKE AC220 SureGrip™ Alligator Clip Set One pair (red, black) of small, insulated, nickel plated jaws Blunt tip grabs round screw heads up to 9.5 mm Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed FLUKE C35 Lightweight Soft Accessory Case Durable polyester 600D case construction for long life Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools FLUKE TL224 SureGrip™ Silicone Test Lead Set DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold FLUKE 80BK Integrated DMM Probe (Type K) Type-K thermocouple with standard shrouded banana jack Convenient one piece construction Compatible with DMMs with temperature measurement functions Measurement range:-40 to 260°C FLUKE TL238 SureGrip™ Slim Reach Test Probe Set An accessory kit especially designed for working in high energy environments The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip Specifications Voltage DC Maximum Voltage 1000V Accuracy ±(0.05%+1) Maximum Resolution 10 µV Voltage AC Maximum Voltage 1000V Accuracy ±(0.7%+2) True RMS AC Bandwidth 20kHz* *with low pass filter; 3db @ 1kHz Maximum Resolution 0.1 mV Current DC Maximum Amps 10A (20 A for 30 seconds maximum) Amps Accuracy ±(0.2%+2) Maximum Resolution 0.01 µA Current AC Maximum Amps 10A (20 A for 30 seconds maximum) Amps Accuracy ±(1.0%+2) True RMS Maximum Resolution 0.1 µA Resistance Maximum Resistance 50 MΩ Accuracy ±(0.2%+1) Maximum Resolution 0.1Ω Capacitance Maximum Capacitance 9,999 µF Accuracy ±(1%+2) Maximum Resolution 0.01 nF Frequency Maximum Frequency 200 kHz Accuracy ±(0.005%+1) Maximum Resolution 0.01 Hz Duty Cycle Maximum Duty Cycle 99.9% Accuracy ±(0.2% per khz +0.1%) Maximum Resolution 0.1% Temperature Measurement -200.0°C - 1090°C -328.0°F - 1994.0°F excluding probe 80 BK Temperature Probe -40.0°C - 260°C -40.0°F - 500°F, 2.2°C or 2% whichever is greater Conductance Maximum Conductance 60.00 nS Accuracy ±(1.0%+10) Maximum Resolution 0.01 nS Diode Range 3 V Resolution 1 mV Accuracy ± (2 % + 1) Duty Cycle Range Accuracy Within ± (0.2% per kHz + 0.1 %) Environmental Specifications Operating Temperature -20°C to +55°C Storage Temperature -40°C to +60°C Humidity (Without Condensation) 0% - 90% (0°C - 35°C) 0% - 70% (35°C - 55°C) Operating Altitude 2000 m Safety Specifications Overvoltage category EN 61010-1 to 1000 V CAT III, 600V CAT IV Agency Approvals UL, CSA, T�V, VDE listed Mechanical & General Specifications Size 201 x 98 x 52 mm (with holster) Weight 355 g Weigh With Holster and Flex-Stand 624 g Display Digital 6000 counts updates 4/sec. (Model 87 also has 19,999 counts in high-resolution mode.) Analog 32 segments, updates 40/sec. Frequency 19,999 counts, updates 3/sec at > 10 Hz. Warranty Lifetime Battery Life Alkaline ~400 hours typical, without backlight Shock 1 Meter drop per IEC 61010-1:2001 Vibration Per MIL-PRF-28800 for a Class 2 instrument IF YOU WANT FASTER SHIPPING OR SOME EXTRAS – PLEASE, CALCULATE shipping
Price: 489 USD
Location: Forest Hills, New York
End Time: 2025-02-06T13:44:49.000Z
Shipping Cost: 9.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
IP Rating: IP67
DC Voltage Range: 1000 V
MPN: 87VE2
Measurement Category: CAT III, CAT IV
AC Voltage Range: 1000 V
Maximum Input Voltage: 1000V
Brand: Fluke
Form Factor: Handheld
Test/Measurement Functions: Frequency (Hz), Temperature, AC Current, DC Voltage, Capacitance, Continuity Test, Duty Cycle, DC Current, AC Voltage, Diode Test
Features: Auto Power Off, Fused Current (A) Terminal, Auto-Ranging, Backlight, Data Hold, Bar Graph Display, True RMS, Battery Door Access
Number of Counts: 6000
Current Range: 9V Alkaline
Protection Against Liquids: Dripping Water
Protection Against Solids: Dust Protected
Display: Digital
