La Milano

Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the dark

Description: Filament color: Blue Glow in the Dark Color informationLuminescent Blue that glows in the dark in turquoise blue, to glow in the dark it needs to absorb light first, and the place must be quite dark. It can be placed next to a lamp and after turning off the light, you will be able to observe the event! The intensity of the luminescence depends on the base color. This dye is not recommended to be in contact with food. Filament Features Flexible TPU 98A Strong UV resistant Flexible TPU type Printing temperature: 210-220Cº (220ºC recommended) Table temperature: 0º to 60ºC Deformation temperature: 138ºC Speed: <= 75 mm/s between 30 to 40 mm/s It can be used on a cold glass table and lacquer or baton glue, depending on the size and shape of the object. This material adheres well to the table. The material can print at 75mm/s in green and blue: Extruders must have springs to help press the filament close to the toothed gear, although the drawing does not show it. The recommended extruders are Green and Blue. Red ones are not recommended, although some people can still print with TPU. In some cases of humid storage locations, it may be necessary to dehydrate the filament for +/- 8 hours in a fruit dehydrator at 65ºC. !Attention Users with PEI surfaces!Before you start printing with Flex on a PEI surface, clean the nozzle of previous material - preheat the nozzle and load PLA to remove any other material. When loading the Flex, loosen the extruder screws. Keep in mind that when printing with Flex, the automatic filament switching function may not work correctly. Nozzle temperature: 230°C Bed temperature: 25 - 60°C (the higher the object the higher the temperature should be) PEI Surface Preparation: Make sure the surface is clean. Some flexible materials can fuse to the PEI film and require the use of Stic or Baton glue as a separator to prevent damage to the PEI film.

Price: 17.5 USD

Location: Cascais

End Time: 2024-12-29T13:04:53.000Z

Shipping Cost: 0 USD

Product Images

Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the darkFlexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the darkFlexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the darkFlexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the dark

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: reprap.pt

Type: Filament

Color: Blue

Compatible Model: For Anet A8, For BEEVERYCREATIVE BEETHEFIRST, For BEEVERYCREATIVE BEETHEFIRST+, For BQ Hephestos, For BQ Witbox, For BQ Witbox 2, For Creality 3D CR-10, For Prusa i3, Blocks ONE, Blocks ZERO, Ender-3, Ender-5, anet a6, anet et4, tronxy

Filament Diameter: 1.75 mm

Material: TPU

MPN: ATPU175ZL

Country/Region of Manufacture: Portugal

Recommended

Flexible TPU 98A RepRap PT - 1.75mm 500gr - Luminescent Blue - Glow in the dark
Flexible TPU 98A RepRap PT - 1.75mm 500gr - Luminescent Blue - Glow in the dark

$95.00

View Details
Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Pink - Glow in the dark
Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Pink - Glow in the dark

$17.50

View Details
Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the dark
Flexible TPU 98A RepRap PT - 1.75mm 50gr - Luminescent Blue - Glow in the dark

$17.50

View Details
Flexible TPU 98A RepRap PT - 1.75mm 500gr - Luminescent Pink - Glow in the dark
Flexible TPU 98A RepRap PT - 1.75mm 500gr - Luminescent Pink - Glow in the dark

$95.00

View Details