FCX24 Rock Racer Truck Bed Kit McCue RC FastBack Bed For +28 Stretch Kit FMS

Description: FCX24 Rock Racer Truck Bed Kit McCue RC FastBack Bed For +28 Stretch Kit FMS. Discalimer: You must install the McCue RC +28 Trailing arm stretch kit to install this truck bed! Check my eBay store to find a set for yourself!Make your FMS FCX24 Power Wagon Look Fast Standing Still!Complete Kit, Ready to install!Complete kit to change the styling of your FCX24! This Kit comes with 2 bedsides with exhaust cut outs and tail light holes, drop bed floor, Fuel Cell, Bed Bar with faux lights, Roll bars, optional spare tire mount for up to a 64MM tire & 4 bed mounts to securley attach the truck bed to the frame. All Hardware is included in the kit! The bedsides can accommodate many tail light buckets, but no light buckets are included in this kit.You Must Have The +28 Trailing Arm Stretch Kit Installed to use this truck bed. it is not included in the kit.No Drilling! Uses stock holes!The McCue RC Fastback Rock Racer Truck bed uses stock frame holes along with printed spacers to attach securley to the frame. The roll bar and truck bed is very much part of the chassis of the truck once installed, Ridiculously strong! This means that this modification is completley reversable if you change the direction that your build is headed.Matches FMS Power Wagon Styling! 100% Departure Angle!This truck bed is based off of a 1946 power wagon truck bed, and follows the styling of the fenders from FMS. This is my take on a Resto-Mod style Rock Racer / Ultra 4 Car rear back half. The Bobbed rear fenders & bed allow for a 100% departure angle. The Spare tire is hung out above the rear axle to give you that trophy truck weight distribution so you can float over bumps at high speed. if you have multiple rigs it serves as a squishy nerf bar for those "give me a push" scenarios.Intrested in more FCX24 or SCX24 parts? check my eBay Store for extended trailing arms, bumpers, steering links, cosmetic mods, and the McCue RC Mantis Links!Install InstructionsRemove Hard Body from vehicle. Find the 4 square bed mounts. slip them into the farme from the bottom, with the flange towards the bottom.Rest the bed floor on to the top of the frame, attach the four screws into the printed bed mounts. Do not over tighten!Align the the bed bar to the fuel cell, they should pop together. thread two screws into the countersunk holes.Slide the assembled fuel cell and bed bar into the bed floor between the two vertical sides.To install the optional spare tire mount, slide the 7mm hex mount under the frame crossmember and above the printed bed floor. secure with 2 screws. Take one of the two bedsides and screw it into the bed floor and through the holes in the sides of the fuel cell. Put screws into both front holes attaching them to the bed floor, dont install the rear screws yet.slip the bed roll bars into the rounded sockets between the bed floor and bedside. the square ends slide into the bed bar. use one screw to attach the digonal reinforcing bars at the top, and one at the bottom going through the bedside.if you would like to use taillights from other FMS models, like the Atlas, etc. use m2 hardware to screw them to the underside of the fenders. you may need to trim the locating pins off of the FMS taillight housings.*All items I sell are printed after your order is placed. I have a standard 5 day turnaround time through eBay. Free shipping through USPS first class.If you need any help with install or have any questions do not heasitate to send me a message! Thank You For Reading And Have a Great Day!-McCue RC

Price: 30.99 USD

Location: Tempe, Arizona

End Time: 2024-12-08T20:01:46.000Z

Shipping Cost: N/A USD