Estes Flying Model Rocket Kit Low -Boom SST™ EST 7289

Description: Estes Flying Model Rocket Kit Low -Boom SST™ 7289 In an era of aerospace marvels, the supersonic transport (SST) stood out. By the mid-1960s, multiple nations were pursuing the goal of an SST passenger jet. Imagine traveling from New York to L.A. in less than two hours – it was the verge of a revolution in air travel! But there were problems. Budget overruns and projections of enormous operating costs were limiting the passenger SST’s appeal. But the real death knell to an international fleet of SSTs was the excessive sound – these super-fast jets were simply too noisy. The SST’s thunderous “sonic booms” – faster-than-sound shock waves – were dangerously loud. So loud that SST activity over the continental US was banned, with other nations following suit. Eventually, supersonic flights were limited to ocean routes. Most nations dropped their SST projects and a single model, jointly developed by England and France, was produced in very limited numbers. In the end, the revolution never came. Fast forward to today. After decades of test flights and analysis, a solution may finally be at hand: The Low-Boom SST. By adjusting critical aspects of aircraft features like nose shape, fuselage length, wing surface area, engine output, etc., the duration and power of the sonic boom can be minimized. “Low-boom” supersonic test aircraft are now being flown successfully, and passenger jet designs are in the works. Estes is looking ahead with its own Low-Boom SST – a sleek, 30-inch long, delta-winged model rocket of the next generation of quiet, super-fast passenger jets. This Expert level kit is loaded with features, including intricate, balsa-constructed, underwing engine pods and a large sheet of detailed water-slide decals to complete the scale-like look. Launch and watch as the Low-Boom SST climbs to 400 feet on a C6-3 engine and gently returns under a large 15-inch parachute. The SST revolution might be on its way after all! WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, yellow glue, plastic cement, sanding block, hobby knife, masking tape, clear tape, primer (white), paint (red, white) and clear coat (optional). (Tools, construction and finishing supplies not included.)WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included). Skill Level 4 Expert Recommended Engines C5-3, C6-3 Projected Max Altitude 400 ft. (122 m) Recovery System 15 in. (38.1 cm) Parachute Length 30 in. (76.2 cm) Diameter 1.33 in. (34 mm) Estimated Weight 3.8 oz. (107.7 g) Estimated Assembly Time 6 Hours (painting and glue drying time not included) Fin Materials Laser cut wood Decal Type Waterslide Launch System Porta-Pad II and Electron Beam Launch Controller Launch Rod Size 1/8" Age Recommendation Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.Model Rocket Kits are rated by Skill Level1 Beginner2 Intermediate3 Advanced4 Expert5 MasterIf you are just starting in the hobby start at the beginner level and move up from there at your own pace.What is needed to build and flyAll model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include:Scissors, Hobby KnifeRulerWood Glue, Model Cement or CA(Super Glue)SandpaperMasking TapeFinishing Supplies like:Wood FillerSealer/PrimerPaintLaunching Equipment and Supplies like:Recovery waddingLaunch PadLaunch ControllerPower supplyModel Rocket Motors and IgnitersA safe place to fly using guidelines from the National Association of Rocketry Safety Code

Price: 29.99 USD

Location: Dayton, Ohio

End Time: 2024-05-19T19:55:43.000Z

Shipping Cost: 0 USD