Description: EPEVER MPPT solar charge controller 40A (XTRA4415N-G3) 12V/24V/36V/48V auto work, Common negative grouding, Max PV 150V, Solar Panels Max input power 520W/1040W/1560W/2080W charge for 12/24/36/48V battery system. Constant voltage output function. Multiple load work modes. Advanced MPPT technology and ultra-fast tracking speed, tracking efficiency is up to 99.5%. Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%. Advanced MPPT control algorithm to minimize the lost rate and lost time. Accurate recognizing and tracking of multi-peaks maximum power point. Wider MPP(maximum power point) running voltage to optimize PV utilization. Real-time energy statistics function. Support multi battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li(NiCoMn)O2, User. Equipped with stable self-activation function for the lithium battery. Battery temperature compensation. Comprehensive electronic protections, Protection Built-in Against Reverse Polarity, Overcharging, Over-discharging, Overload, Short-circuiting, and Reverse current. Charging power reduction automatically for over-temperature. Limit the charging power & charging current to no higher than the rated value. Operation at full load without charging power reduced in the working temperature range. Three different color LED indicators and LCD display show your PV/Battery/Load working Status more intuitive; the LCD buttons support setting battery voltage parameters; RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring to adjust settings by EPEVER APP, or set parameters via the PC software, remote meter. Low self-consumption lower than 10mA. Stable performance components to ensure the service life. Dustproof and waterproof design with IP33 enclosure. This 40Amp mppt controller can be used in a wide range of applications such as communication base station, home system, street lighting system, marine system, RV solar system, and site monitoring system. EPEVER MPPT Solar Charge Controller 40Amp XTRA4415N-G3 ,12V/24V/36V/48V DC auto work, Solar Panels Max PV 150V, Max input Power 520W / 1040W / 1560W / 2080W. Common negative grounding. Applicable battery types : Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-defined Technical Data: Model: XTRA4415N-G3 (2024 New Version)Rated charge and discharge current :40 AmpNominal system voltage:12V/24V/36V/48V DC auto work (Manually select 12V/24V/36V/48V for Lithium type)Max. PV input power: 520W charge for 12V battery, or 1040W @ 24V, or 1560W @ 36V, or 2080W @ 48V . Max. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)Support lead-acid Battery types : Sealed(default), Gel (AGM), Flooded, User ;Support Lithium Battery types : LiFePO4 (4s/12V; 8s/24V;15s-16s/48V ); Li (NiCoMn)O2 (3s/12V; 6s-7s/24V ;13s-14s/48V) ; User(9~68V)Battery voltage range : 8～68VMPP voltage range:V(BAT+2V)～108VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#6AWG(16mm2)Mounting hole size:Φ5mmDimension:255*189*83.2mm ; weight :2.47 KG Package List: 1 X MPPT Solar Charge Controller 40A (XTRA4415N-G3)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English) Note: Our US warehouse in Chicago, professional engineer local team supply solar system solutions and Tech-support for you in time. Package List:1 X MPPT Solar Charge Controller 40A ( XTRA4415N-G3)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English)Electronic Protections :Note : Our warehouse located in Chicago, IL, US , we professional team and engineer supply solar system solutions and tech-support services for you in time .•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•Controller overheating protection•TVS High Voltage Transients protectionStep: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)XTRA4415N controller could set battery types: Sealed; Gel(AGM); Flooded ; LiFePO4 (4s/12V; 8s/24V;15s-16s/48V ); Li (NiCoMn)O2 (3s/12V; 6s-7s/24V ;13s-14s/48V) .More details parameters setting ( User type: 9~68V) could be setting by controller buttons ; more details parameters setting need EPEVER accessories : MT50 , WiFi adapter , BLE adapter, eLOG01, PC software ;Now we supply all new upgraded version controllers , if you still have old version controller , Please contact with our tech-support services to get 2022 program firmware upgrade file , then you could upgrade controller to set Lead-Acid & Lithium types by controller buttons too ;We have prepared listing video tutorials about how to use the controller and how to set parameters . More questions please feel free to ask vendor first .Note: The following accessories are not included in controller box , you could check and purchase accessories separately .MT50RTS300R47K3.81ACC-RS485-USB-150UBLE adapterWiFi adaptereLOG01EPEVERWith 2m communication cableLine length:3mLine length:1.5mEPEVER-BLE-RJ45-DEPEVER-WiFi-2.4G-RJ45-DWith 2m RS485 + 1.5m USB communication cableEPEVERFor EPEVER contoller with RS485 portFor EPEVER contoller with 3.81/2P connectorFor EPEVER contoller with RJ45 connectorFor EPEVER contoller with RS485 portFor EPEVER contoller with RS485 portFor EPEVER contoller with RS485 portEPEVERConnector type: RJ45Testing temperature:-55℃～+125℃For PC softwareConnector type: RJ45Connector type: RJ45Connector type:2 RJ45;1 Micro US Shipping :Fast and free shipping in the United States! We will ship within 1-2 business days, and our products are stored in a warehouse in Chicago, Illinois. Our products are fully insured from the manufacturer and properly boxed to ensure safe arrival at your home. Warranty&Quality Guarantee :We provide a 1 year warranty for this product, and we have professional technicians in the United States to solve problems and provide technical support for you.We have our own warehouse in Chicago, Illinois, which can guarantee the fastest delivery speed and provide you with the best logistics services. No matter what problems you encounter during purchase or use, our strong after-sales service team will serve you wholeheartedly. Please feel free to contact via eBay messages. Contact us :Please contact us by ebay message if you have any question to ask.All our responses will be sent to your email. If you don't receive a response within 1-2 business days, please check if your email provider uses too strict spam filters to block Ebay's emails, please email us again. We will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem . Feedback :Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback.If you have any questions, please contact us via ebay. We usually respond within 24 hours on weekdays.
Price: 169.99 USD
Location: Chicago, Illinois
End Time: 2024-08-26T09:26:55.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Current Output: 40A
System Configuration: Off-Grid
Power Source: Solar
Maximum Input Voltage: 150V
Inverter Technology: Battery-Based
Current Rating: 40A
Conversion: ≥98.6%
Brand: Epever
Current Type: DC
Type: Charger/Inverter
Efficiency: ≥99.5%
Voltage: 12V/24V/36V/48V
Model: XTRA4415N-G3
Recommended Environment: Indoor/Outdoor
Features: Automatic Voltage Detection, Daylight Operation, LCD Display, LED Indicator, Temperature Control, Temperature Sensor, RJ45 Port
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Abrasion Resistant, Acid Resistant, Dustproof
Application: Agriculture/Farming, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Pool, Recreational Vehicle (RV)
Protection Properties: Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overvoltage Protection, Reverse Current Protection, Safety Circuit Protection, Short Circuit Protection, Thermal Protection, Under Voltage Protection
Power: 520W for 12V BAT / 1040W for 24V / 1560W for 36V / 2080Vfor 48V
