EPEVER MPPT Solar Charge Controller 30A 40A Charger 12/24/36/48V XTRA4415N G3

Description: Overview: XTRA-N G3 series controllers, based on a new design concept, adopt the solar charge controller as the main component. Work with WiFi adapter or Bluetooth adapter, which helps the end-users read and write parameters by phone APP conveniently. The controllers adopt the advanced MPPT control algorithm, improving the maximum power point (MPP) tracking and acting speed. By minimizing the MPP loss rate and time, the controllers can track the MPP quickly to obtain the maximum energy under any conditions. Independent voltage regulation, namely, the battery terminal of the controller can be connected to loads directly when there is no battery, is a new add function. It is friendly to various lithium batteries, avoiding the instability output voltage caused by the internal protection of the lithium batteries. The low self-consumption design significantly reduces the static power consumption and extends system standby time. Characters of the charging power/current limit, charging power auto-reduction under the high temperature ensure the system stability after connecting with excess PV modules or working in a high-temperature environment. IP33 Ingress protection and isolated RS485 com port design improve the controller’s reliability and meet the different application requirements.XTRA-N G3 series owns a three-stage charging mode, which effectively prolongs the battery's lifespan and improves performance. Comprehensive electronic protections, such as overcharge, over-discharge, PV & battery reverse polarity, etc., ensure the solar system is more reliable and durable. This controller can be widely used for RVs, household systems, monitoring fields, etc. Features：High quality and low failure rate components of ST or IR to ensure the service life2Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%Advanced MPPT control algorithm to minimize the lost rate and lost timeAccurate recognizing and tracking of multi-peaks maximum power pointWider MPP(maximum power point) running voltage to optimize PV utilizationSupport multi battery types including lithium batteriesEquipped with a stable self-activation function for the lithium batterySet the battery voltage parameters on the LCD(For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE.")Battery temperature compensationLimit the charging power & charging current to no higher than the rated valueReal-time energy statistics functionCharging power reduction automatically for over-temperaturework with WiFi adapter or BLE adapter to adjust settings through EPEVER APPRS485 communication interface with optional 4G or Wi-Fi modules for remote monitoringSetting parameters via the PC software, APP, or remote meterConstant voltage output function (To enable the constant voltage output function, ensure the input power is higher than the output power. Suppose the input power is lower than the output power. In that case, the controller enters the ON-OFF state intermittently caused by the under-voltage protection.)Comprehensive electronic protectionsMultiple load work modesDustproof and waterproof design with IP33 enclosureLow self-consumption, lower than 10mAOperation at full load without charging power reduced in the working temperature rangeTechnical Data:EPEVER MPPT Solar Charge Controller 30A 12V/24V DC auto work, Solar Panels Max PV 100V, Max input Power 390W/780W, Common negative grounding. Applicable battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-definedModel: XTRA3210N-XDS2(G3)Rated charge and discharge current: 30AmpNominal system voltage:12V/24V DC auto work ( Manually select voltage for lithium battery type)Max. PV input power: 390W charge for 12V battery system or 780W charge for 24V battery system Max. PV open circuit voltage:100V(at minimum operating environment temperature) , 92V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed, Gel(AGM), Flooded, User Lithium battery:LiFePO4 (4s/12V; 8s/24V), Li(NiCoMn)O2 (3s/12V; 6s/24V), User .Battery voltage range : 8～32VMPP voltage range: V(BAT+2V)～72VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) Recommended Wire cable:#8AWG(10mm2)Mounting hole size:Φ5mmDimension:230*165*63mmweight :1.3 KG------------------------------------------------------------------------------------------------------------------------------------------------------ EPEVER MPPT Solar Charge Controller 30A,12V/24V DC auto work, Solar Panels Max PV 150V, Max input Power 390W/780W, Common negative grounding. Applicable battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-definedModel: XTRA3215N-XDS2Rated charge and discharge current: 30AmpNominal system voltage:12V/24V DC auto work ( Manually select voltage for lithium battery type)Max. PV input power: 390W charge for 12V battery system / 780W charge for 24V battery system Max. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed, Gel(AGM), Flooded, User Lithium battery:LiFePO4 (4s/12V; 8s/24V), Li(NiCoMn)O2 (3s/12V; 6s/24V), User .Battery voltage range : 8～32VMPP voltage range: V(BAT+2V)～108VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) Recommended Wire cable:#8AWG(10mm2)Mounting hole size:Φ5mmDimension:255*187*67.8mmweight :1.66KG------------------------------------------------------------------------------------------------------------------------------------------------------ EPEVER MPPT Solar Charge Controller 40A 12V/24V DC auto work, Solar Panels Max PV 100V, Max input Power 520W/1040W, Common negative grounding. Applicable battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-definedModel: XTRA4210N-XDS2(G3)Rated charge and discharge current: 40AmpNominal system voltage:12V/24V DC auto work ( Manually select voltage for lithium battery type)Max. PV input power: 520W charge for 12V battery system or 1040W charge for 24V battery system Max. PV open circuit voltage:100V(at minimum operating environment temperature) , 92V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed, Gel(AGM), Flooded, User Lithium battery:LiFePO4 (4s/12V; 8s/24V), Li(NiCoMn)O2 (3s/12V; 6s/24V), User .Battery voltage range : 8～32VMPP voltage range: V(BAT+2V)～72VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) Recommended Wire cable:#6AWG(16mm2)Mounting hole size:Φ5mmDimension:255*185*67.8mmweight :1.72 KG------------------------------------------------------------------------------------------------------------------------------------------------------ EPEVER MPPT Solar Charge Controller 40A,12V/24V DC auto work, Solar Panels Max PV 150V, Max input Power 520W/1040W, Common negative grounding. Applicable battery types: Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-definedModel: XTRA4215N-XDS2(G3)Rated charge and discharge current: 40AmpNominal system voltage:12V/24V DC auto work ( Manually select voltage for lithium battery type)Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system Max. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed, Gel(AGM), Flooded, User Lithium battery:LiFePO4 (4s/12V; 8s/24V), Li(NiCoMn)O2 (3s/12V; 6s/24V), User .Battery voltage range : 8～32VMPP voltage range: V(BAT+2V)～108VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) Recommended Wire cable:#6AWG(16mm2)Mounting hole size:Φ5mmDimension:255*187*75.7mmweight :2.08 KG------------------------------------------------------------------------------------------------------------------------------------------------------ EPEVER MPPT Solar Charge Controller 40A,12V/24V/36V/48V DC auto work, Solar Panels Max PV 150V, Max input Power 520W/1040W/1560W/2080W. Common negative grounding. Applicable battery types : Sealed, Gel(AGM), Flooded, LiFePO4, Li[NiCoMn]O2 and User-definedModel: XTRA4415N-XDS2(G3)Rated charge and discharge current: 40 AmpNominal system voltage:12V/24V/36V/48V DC auto work ( Manually select voltage for lithium battery type)Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system / 1560W charge for 36V battery system / 2080W charge for 48V battery systemMax. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed, Gel(AGM), Flooded, User Lithium battery:LiFePO4 (4s/12V; 8s/24V), Li(NiCoMn)O2 (3s/12V; 6s/24V), User .Battery voltage range : 8～68VMPP voltage range: V(BAT+2V)～108VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C -- +70°C/-4°F -- 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) Recommended Wire cable:#6AWG(16mm2)Mounting hole size:Φ5mmDimension:255*189*83.2mm ; weight :2.6 KG------------------------------------------------------------------------------------------------------------------------------------------------------ We have prepared listing video tutorials about how to use the controller and set parameters. More questions please feel free to contact with us.Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)Note: The following accessories are not included in controller box , you could check and purchase accessories separately .MT50RTS300R47K3.81ACC-RS485-USB-150UBLE adapterWiFi adaptereLOG01EPEVER/EPsolarWith 2m communication cableLine length:3mLine length:1.5mEPEVER-BLE-RJ45-DEPEVER-WiFi-2.4G-RJ45-DWith 2m RS485 + 1.5m USB communication cableEPEVER/EPsolarFor EPEVER contoller with RS485 portFor EPEVER contoller with 3.81/2P connectorFor EPEVER contoller with RJ45 connectorFor EPEVER contoller with RS485 portFor EPEVER contoller with RS485 portFor EPEVER contoller with RS485 portEPEVER/EPsolarConnector type: RJ45Testing temperature:-55℃～+125℃For PC softwareConnector type: RJ45Connector type: RJ45Connector type:2 RJ45;1 Micro USB XTRA-N mppt contoller's Load working modes (note: below pic is the screenshot of mobile app, for reference only) 1. Manual Control (default)Control ON/OFF of the load via the button or remote commands (e.g., APP or PC software).2. Light ON/OFFSet your own's turn ON/OFF voltage,once your solar panel's voltage reach this value, your load will ON/OFFON voltage=sunset; OFF voltage=sunrise3. Light ON+ TimerAfter load ON according the voltage you set, you can set how long your load keep working. e.g. 101: Load will be ON about 1 hour after sunsetTwo working time periods can be set, setting range is 101~115 and 201~215201 means Load will be ON about 1 hour before sunrise4. Light ON+ Timer ControlControl the load ON/OFF time through setting the real-time clock.Tips when wiring the solar charge controller:1. Turn the adjustment terminal counterclockwise and insert the wire into the new opening between the plate and the "top" of the terminal hole.2. Before connecting to the controller, make sure your battery is charged at least 60%, otherwise the controller cannot read your battery correctly.3. First connect the battery to the controller! (When the LCD is powered on, it means that the controller reads the battery successfully. If not, please reconnect it.)4. After the LCD of the controller is powered on, connect the solar panel array to the controller.5. When the LCD display is not powered, do not connect the solar panel array to the controller (meaning your battery is not successfully connected).6. Be careful that your input power and voltage do not exceed the maximum value.7. Do not reverse the polarity when wiring.8. Lithium battery setting can be set through mobile phone APP or PC software. (Accessories are optional, not included) Shipping :Fast and free shipping in the United States! We will ship within 1-2 business days, and our products are stored in a warehouse in Chicago, Illinois. Our products are fully insured from the manufacturer and properly boxed to ensure safe arrival at your home. Warranty&Quality Guarantee :We provide a 1 year warranty for XTRA Series, and we have professional technicians in the United States to solve problems and provide technical support for you.We have our own warehouse in Chicago, Illinois, which can guarantee the fastest delivery speed and provide you with the best logistics services. No matter what problems you encounter during purchase or use, our strong after-sales service team will serve you wholeheartedly. Please feel free to contact via eBay messages. Contact us :Please contact us by ebay message if you have any question to ask.All our responses will be sent to your email. If you don't receive a response within 1-2 business days, please check if your email provider uses too strict spam filters to block Ebay's emails, please email us again. We will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem . Feedback :Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback.If you have any questions, please contact us via ebay. We usually respond within 24 hours on weekdays.

Price: 59.99 USD

Location: Chicago, Illinois

End Time: 2025-01-20T09:17:57.000Z

Shipping Cost: 0 USD

Product Images

EPEVER MPPT Solar Charge Controller 30A 40A Charger 12/24/36/48V XTRA4415N G3

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Current Output: 30A/40A

System Configuration: Off-Grid

Power Source: Solar

Inverter Technology: Battery-Based

Color: White

Wattage: 520W/1040W/1560W/2080W

MPN: XTRAN-G3 Series

Brand: Epever

Current Type: DC

Type: Charger/Inverter

Voltage: 12V/24V/36V/48V

Model: XTRAN-G3

Recommended Environment: Indoor/Outdoor

Features: LCD Display, Temperature Control, Wi-Fi Port

Charging Mode: MPPT (Maximum Power Point Tracking)

Resistance Properties: Abrasion Resistant, Acid Resistant, Dustproof

Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed

Protection Properties: Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overvoltage Protection, Reverse Current Protection, Safety Circuit Protection, Short Circuit Protection, Thermal Protection, Under Voltage Protection