Description: ★EPever MPPT Solar Charge Controller 60Amp (Tracer6415AN ), 12V/24V/36V/48V Auto identifying system voltage , Max PV 150V , Common Negative Ground. Auto control system to limit the charging power & current go over the rated value.★Max Input Current: 60 amp, Max Input Solar panels Power: 750W/12V; 1500W/24V; 2250W/36V; 3000W/48V; Real-time energy recording and statistical.★Support Lead-acid & Lithium types of Battery charging : Lead-acid (Sealed, AGM, Gel, Flooded) and Lithium Battery :LiFePO 4 / Li(NiCoMn)O 2 / User. Battery temperature compensation function to ensure the battery’s life.★RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.★ MPPT Solar controller 60A with high quality & low failure rate components of ST and Infineon and Battery temperature compensation function to ensure the controller’s life.Real-time energy recording and statistical.EPEVER MPPT Solar Charge Controller 60A kit ( Tracer6415AN ) ,12V/24V/36V/48V DC auto work ,Max PV 150V , Common negative ground .Based on common negative design and advanced MPPT control algorithm MPPT Charge efficiency > 99%.With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system.All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application.It support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.Technical Data:Nominal system voltage:12V/24V/36V/48V DC auto workRated charge current :60 AmpMax. PV open circuit voltage:150V(at minimum operating environment temperature) 138V(at 25℃ environment temperature)MPP voltage range:V(BAT)+2V～108VMax. PV input power: 750W/12V, 1500W/24V, 2250W/36V ,3000W/48VTracking efficiency : ≥99.5%Max. conversion efficiency :98.1%Battery type : Lead-acid (Sealed, Gel, AGM, Flooded) and Lithium Battery: LiFePO4 / Li(NiCoMn)O2 / User. Battery temperature compensation function to ensure the battery’s life.Battery input voltage range: 8--68VTemperature: -20°C -- +70°C/-4°F -- 158°FGrounding : Common negative groundingRelay: Rated Value:5A/30VDC; Max. Value:0.5A/60VDCRS485 interface: RS485(RJ45)Power terminals:#2 AWG(35mm2)Recommended cable:#6 AWG(16mm2)Dimension:340*236*119mmweight :4.5 KGPackage List:1 X Tracer6415AN MPPT Solar Charge Controller1 X Manual (English)Note :Fast shipping from Chicago IL warehouse , our professional technical engineer could supply solar system solutions for you in time .Support Max 8-Multiple units work in parallelBattery types: Sealed (default)/ Gel/ Flooded ,LiFePO4 , Li (NiCoMn)O2 ,(default parameters);User type could be setting by controller buttons ; more parameters setting need EPEVER accessories : MT50 , WiFi adapter , BLE adapter, eLOG01, PC software ;Note: The following accessories are not included in controller box , you could check and purchase accessories separately . Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3~2~1Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)
Price: 235.99 USD
Location: Chicago, Illinois
End Time: 2024-08-24T06:50:01.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Epever
Type: Solar Charge Controller
Current Type: DC
System Configuration: Off-Grid
Voltage: Under 150V
Model: Tracer6415AN
Current Rating: 60A
Features: Automatic Voltage Detection, LCD Display, Temperature Sensor
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: Agriculture/Farming, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation
