Engine Controller ESD5330 Speed Control Governor Unit for Diesel Generator

Description: Speed Control Unit Governor ESD5330 ESD5330E We have Generator Electric Control Unit ESD5330 in our Regular Stock! The Brands mentioned here are for reference purpose only, our parts can exactly replace the original ones. Generator Control Unit ESD5330E : A two element speed switch Speed ramping idle to operating speed Starting fuel control for lower engine exhaust emissions A unique actuator power drive circuit Accessory Inputs for loading sharing Variable speed governing Protection against reverse battery voltage Protection against transient voltage The ESD5330 speed control unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment. The circuit board is conformally coated to seal out moisture and resist vibration. If water, mist or condensation can come in contact with the controller, it should be mounted vertically. This will allow any accumulated fluids to drain away from the speed control unit. The ESD5330 Series his several special built in features: • A Two Element Speed Switch (overspeed sensing and crank termination) • Speed Ramping from Idle to Operating Speed • Starting Fuel Control for lower engine exhaust emissions • A unique actuator power drive circuit ESD5330 SERIES SPEED CONTROL UNIT ESD5330: Standard Unit, 24 Volt operation E505331 use w/EFC Actuator ESD5330-12: 12 Volt operation ESD5331-12 use w/EFC Actuator SPECIFICATIONS PERFORMANCE Isochronous............................................................................................ ± 0.25% or bettor Operating Speed Range .................................................................... 1K - 7.5 Hz continuous Speed Drift with Temperature ......................................................................± 1% maximum Idle Speed Adjust Range ................................................................ 25 – 85% of rated speed Droop Range .............................................................................Adjustable from 0-5% for ....................................................................... a 1.5 actuator current change Speed Trim Range ............................................................................................. ± 200 Hz Remote Variable Speed Range ..................................................... 25 to 100% of rated speed Speed Ramp Time Acceleration adjustment range .................................................. 266 Hz/Sec to 1300 Hz/Sec Deceleration adjustment range .................................................. 250 Hz/Sec to 1000 Hz/Sec Starting Fuel Adjustment 0 - 1.5A .......................................................... 120, 175, 225, 275 Actuators/SW2-7 “OFF” 0.3 - 4A ...................................................................................2000 Aduator/SW2-7 “ON” 0verspeed Set Point ............................................................................ 2400 Hz to 8300 Hz Crank Termination Set Point .................................................................. 200 Hz t0 2050 Hz Terminal Sensitivity H..........................................................................-105 Hz, ±15 Hz/Volt @ 5 K Impedance M ......................................................................-130 Hz, ±15 Hz/Volt @ 1 M Impedance K .....................................................................-685 Hz, ±40 Hz/Volt @ 225 K Impedance N ....................................................................+1000 Hz, ±50 Hz/Volt @ 8 K Impedance ENVIRONMENTAL Ambient 0perating Range .................................................-40° to +85°C (-40° to +185°F) Relative Humidity (Noncondensing) ......................................................................up to 95% All Surface Finishes .......................................................Fungus proof and corrosion resistant INPUT POWER – Nominal Ratings DC Supply ................................................................... 24 ±20% VDC battery systems ........................................................ (transient and reverse voltage protected) Maximum Continuous DC Supply Voltage ................................................................32 Volts Polarity ...............................................................................Negative ground (case isolated) Power Consumption (Engine Stopped) .......................................100 MA (No actuator current) Speed Signal Range .........................................................................................0.5-50 VAC Maximum Actuator Current ...............................................Internally limited to 9 A continuous Maximum Current, Speed Switch Contact (Terminals 1-6) .....................................................................6 Amps RELIABILITY Vibration ............................................................................................... 1 G @ 20-100 Hz Shock ..........................................................................................................10 G (11 ms) Testing ....................................................................................... 100% functionally tested PHYSICAL Dimensions .............................................. See FIGURE 1 Wiring Diagram and Outline (page X) Weight ...............................................................................................2.0 lbs (0.91 grams) Mounting...............................................................................Any position, vertical preferred EMC Conforms to CE directive for light and heavy industrial usage when installed in accordance with special instructions and as per the wiring diagram. Shipment term 1. We Ship to Worldwide, except APO/FPO 2. Economic shipping by china post / ePaket... Will take longer shipping time. 3. Expedited international shipping by DHL/UPS/Fedex.... 4. Orders processed timely after your payment. 5. We only ship to confirmed order addresses. Your order address MUST MATCH your address. Why choose us ? 1.Started export since the year of 2006,with quick response to serve the oversea customers 2.Have already passed the strict quality inspection of ISO9001:2000 quality management system 3.Strong R&D Team to design and test products 4.Professional designers and technicians to provide technical assitance 5.Strict quality control process with strict standards 6.Strong installation consulting support 7.Quick after-sale technical advice and guidance. Guarantee 1. Guarantee:365 days after selled. 2. During guarantee,the items share free repairs or replacement. 3. Customer is responsible for the freight come-and-go,and the custom tax. 4. You may consider to send the defective item with a economical way,and we send back the repaired items with your new order together. 5. To save the cost,pls send the item back without packing. 6. Pls provide the defective appearance and related invoice number. 7.We do not repair or replace item with an expired warranty. 8.All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email or give us a call any time.

Price: 209.99 USD

Location: SHENZHEN

End Time: 2024-02-20T04:30:51.000Z

Shipping Cost: 0 USD