Elmo Motion Control Cello Servo Drive 800W 20-95V CEL-A10/100-C6 CANopen RS-232

Description: Elmo Motion Control Cello Servo Drive 800W 20-95V CEL-A10/100-C6 CANopen RS-232 Cello Smart and Slim Digital Servo Drive for Brush and Brushless Motors Operates in current, velocity, position and advanced position modes The Cello is a series of intelligent, slender digital servo drives for DC brush, brushless motors and linear motors. The slim servo drive supports up to 30 amps continuous current. Its high density allows the drive to deliver a peak of 6800 W of power and 3400 W...Elmo Motion Control Cello Servo Drive 800W 20-95V CEL-A10/100-C6 CANopen RS-232 CelloSmart and Slim Digital Servo Drive for Brush and Brushless MotorsOperates in current, velocity, position and advanced position modesThe Cello is a series of intelligent, slender digital servo drives for DC brush, brushless motors and linear motors. The slim servo drive supports up to 30 amps continuous current. Its high density allows the drive to deliver a peak of 6800 W of power and 3400 W of continuous power. Based on Elmo's SimplIQ Motion control technology, the Cello is capable of operating in position, velocity and current modes and contains a wide range of feedback and I/O options. When using Elmo's Composer Software users can easily perform drive setup, configuration, tuning, analysis and programming. The drive operates on DC power. The Cello's slender case enables an efficient and cost saving implementation.Feature Units5/6010/6015/6015RMS /6030/603/10010 /10015/10015RMS /10030 /1002/2006/20010 /20015 /20015RMS/ 200 Minimum supply voltageVDC102040 Nominal supply voltageVDC5085170 Maximum supply voltageVDC5995195 Maximum continuous power outputW24048072010001440260800120017002400360960160024003400 Efficiency at rated power (at nominal conditions)%> 97 Maximum output voltage97% of DC bus voltage at f=22 kHz Auxiliary supply voltageVDC24 ± 20% Auxiliary power supplyVA12 Amplitude sinusoidal /DC continuous currentA5101521303.3101521302.256101521 Sinusoidal continuous RMS current limit (Ic)A3.57.110.61521.22.37.110.61521.21.64.27.110.615 Peak current limitA2 x Ic Output power without additional heatsink%100751001007550 Weightg (oz)640 g (22.6 ounces) Dimensions mm (in)150 x 25.4 x 105 (5.9" x 1.0" x 4.1") Digital in/Digital out/Analog in 10/5/2 Mounting method Wall Mount (on back or on side)FeatureUnitSpecificationServo ModesCurrent, Velocity, Position, Advanced PositionCoreSimplIQCommunicationRS-232, CANopen: DS402, DS305PWM switching frequencyKHz22 ± 5% default on the MotorSwitching methodAdvanced Unipolar PWMCurrent Loop BandwidthKHz<2.5Current Sampling RateKHzUp to 16, default 11Velocity Loop BandwidthHz<350Velocity Sampling RateKHzUp to 8, default 5.5Position Loop BandwidthHz<80Position Sampling RateKHzUp to 4, default 2.75Maximum heat sink temperatureC (F)85C - 86C (185F - 190F)Ambient operating temperatureC (F)0å¡ ~ 40å¡C (32 ~ 104F) models for extended environmental conditions are availableStorage temperatureC (F)-20~ 85C (-4 ~ +185F)Maximum humidity%90% non-condensingMaximum Operating Altitudem (ft)2,000 m (6562 feet)Protection levelStandard and Advanced ModelsFeatureStandardAdvancedCANopen interface (DS 301, DS 402)YesYesCurrent modeYesYesVelocity mode, followerYesYesPosition jog, follower, point-to-pointYesYesPulse and direction inputYesYesDual loop, velocity and positionNoYesPT position versus time modeYesYesPVT position and velocity versus timeYesYesECAM / FollowerNoYesOverall user program size2 KB32 KB Add suggested items to your listings - Check it out on 3Dsellers.com eBay listing template by 3Dsellers.com - Try for Free!

Price: 170 USD

Location: Bardstown, Kentucky

End Time: 2025-01-30T18:54:07.000Z

Shipping Cost: N/A USD