Elimia HOA 2.5-4-120LC 2 3 HP 480V or 3/4 HP 230V Magnetic Motor Starter Nema 4X

Description: New Model - HOA - Hand/Off/Auto Commonly these units are used when a external separate run signal is used to activate the starter. Unit is wired so that so that starter engages when an external 120V signal is supplied. Main power can be 208-230 or 480V but the power to activate the starter must be 120V only. This is our new line of low cost - better than the competition - magnetic starters. These are available in this configuration up to 20 HP @ 480V; 10 HP @ 230V 3-phase; 5 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components. Every Motor Starter is built and tested to order in Alabama, USA. Our customer's come back time and time again, try one and you will see... Nothing else in this price range even comes close. Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. We offer an extensive line of standard motor starters as well as custom built units. Combination starters and reversing starters are also available in standard and custom configurations. Nobody beats us on motor control centers! Pre-wired for easy installation. This starter includes a three position rotary switch and is set up to run always in "Hand" position and run from external source on demand in "Auto" position. The unit will arrive completely assembled in a real nice NEMA 4X polycarbonate enclosure. These enclosures are not like the competition's thermoplastic boxes. The top half of the enclosure is real polycarbonate and the bottom is blended ABS, fiber and polycarbonate. PG knockouts are provided. The design of the enclosure gives easy access to the motor starter making wiring up easier and allowing for a more compact unit. These enclosures are made in Europe by Ensto of Finland. Model Number: HOA 2.5-4-120LC Model Explanation: HOA = Maintained type three position rotary switch (Hand/Off/Auto) 2.5-4 = Overload Size 120 = Coil Voltage LC = Low cost compact design Sized for 2 or 3 HP @ 480V 3 phase or 3/4 HP @ 208/230V 3 phase. This starter requires a 120V source to activate the starter. IEC type motor starters are made up of primarily two parts. A contactor and overload device. Both devices have maximum ratings and the overload has maximum and minimum ratings. You should choose a motor starter that fits both criteria. If you need help please email or call, we will be glad to assist. To size your starter properly you must determine the following: -Three phase or Single phase -Supply voltage ie. 120V; 208V; 240V; 480V; 600V -Machine single motor HP -Motor FLA (full load Amps) -Application, what type of machine you running All components used in our assemblies are UL Certified.Enclosure size is 7 x 5 x 5, color is light grey. 90 day replacement Elimia warranty. Great price! We have pre-wired DOL motor starters available from 0 HP to 200 HP. Please call 1-855-4Elimia for more info or if we can help sizing a starter. Elimia has assembled and supplied thousands of starters to customers all over the world. In addition to our standard products we design and built custom control panels and packaged drives. Our customers come back again and again for the value products we offer. Please note: We stock an extensive inventory of contactors, overloads, enclosures, switches etc... All motor starters and assemblies are built to order. Lead time may vary from same day to three days. If you need something expedited please call us and we will let you know if we can accommodate. Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping and eBay fees. If the item has been installed and it turns out not be what you needed please call us. We will work with each customer and try to reach a resolution. Buyers: Potential buyers registered outside the USA must get approval before bidding UNLESS the listing indicates them as a ship to location. Most small items are now available for Worldwide shipping. There is no charge for on-sight pickup but 5% tax applies. Please note: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products. Payments: We accept Paypal and Credit Card payments. Credit card payments are only accepted over the phone. We reserve the right to refuse payment from buyers registered in foreign countries or locations with non corresponding ship to addresses. Additionally, we reserve the right to refuse payment from any buyer which will feel is acting in a possible malicious manner. Feedback: Once you are satisfied with your purchase please leave us feedback. If you have any problem with the transaction or product, please contact us.

Price: 130 USD

Location: Fort Payne, Alabama

End Time: 2024-08-02T21:46:55.000Z

Shipping Cost: 18.4 USD