Electric Door Access Control Kit RFID Keypad Power Supply Strike Drop Bolt Lock

Description: Electric Door Access Control Kit RFID Keypad Power Supply Strike Drop Bolt LockItem DescriptionAccess Controller: User capacity: 1000 Card reading type: EM card Card reading distance: 1-5CM Identification method: card, password, card + password Programming password: 123456 Unlocking time: 5 seconds Open the door input: all the way to open the button input Doorbell output: one way wired doorbell output Can be connected to automatic door or gate Working voltage: DC 12V ± 10% Working power supply: <100mA Working temperature: 0 ° C ~ 60 ° C Size of A1: 113*70*20mm Surface Waterproof and dustproof panel The ABS flame-retardant casing is integrally formed. After the installation is completed, a layer of glass glue can be applied to the back cover to achieve a comprehensive waterproof effect. (not IP65 waterproof, can't be used under the rain directly) Support RFID Card, password, RFID Card+ password to open the door Support 1000 card and password user capacity, can set card + password to open the door, the safety factor is higher Power Supply: Material: Steel Output Power: 36W Durability Test: 500000 times Input Frequency: 50-60Hz Input Voltage: 110-260VAC Output Voltage: DC12V/3A Working Temperature: -20 to +65 Time Delay: 0-15 seconds adjustable Relative Humidity: 0%-90% Dimension: 100*65*32mm Door Exit Button: Material: Hard Plastic Maximum Power Rating:36V DC 3A—5A output Support both NC Mode (Fail Safe Mode) & NO Mode (Fail Secure Mode) Dimension:86X86MM ( L / W ) RFID Keyfobs: 125KHz rfid frequency key card Operating frequency: 125kHz Detection range: 0-10cm Each card pre programmed and has a unique identity number on it. Please Noted: There are 5 color of the RFID keyfobs for optional (blue, red, yellow, green, black). We will send mix color by default. If you need other color, please leave message to us. Package List Kit3: Suitable for wooden door, metal door. convenient and beautiful. No need bracket Package including: Access Control keypad + Power supply + NC type Electric Strike lock + Exit button + 10pcs Keyfobs (We will send the NC type by default, if you want NO type, please leave us a message.) Working Voltage: 12V ± 10% Current: 200mA - 450mA Holding Force: 500kg Surface Temperature: Lower than room temperature +20 Working Temperature: -30-+60 Celsius Degree Operating Humidity: 0~90%(non-condensing) Feature：Fail secure (NO), Fail safe(NC) Material: Stainless steel NC type strike lock: Locked when power on, unlocked when power off NO type strike lock: Locked when power off, unlocked when power on Size: 150 x 28 × 34mm（L / W / H） Kit4: Suitable for wooden, metal and Stainless steel door. No need bracket. Package including: Access Control keypad + Power supply + Electric Drop bolt lock + Exit button + 10pcs Keyfobs Working voltage: 12V Time delay: 0s,3s,6s adjustable Working current: Start state 1.2A ; Persistent state 120mA Coil type: Continuous working Security type: Electric power lock, unlock Lock core: The diameter og 12.5MM stainless coer, extending the length of 15MM Locking mode: Magnetic induction Unlock Mode: Fail Safe (Locked when power on, unlocked when power off) Dimension: 150X34X28( L / W / H ) Kit5: Suitable for wooden, metal and glass frame door. No need bracket. Package including: Access Control keypad + Power supply + 180KG Electric Magnetic Lock + Exit button + 10pcs Keyfobs Material: Aluminum alloy shell + iron plate Holding force: 180KG/350lbs Working Voltage: DC12V Working Current: 380-430mA Humidity: 0 to 95% Working Temperature: -10 to 55 Celsius degree Working mode: power-on to lock, power-off to unlock Waterproof: Yes. Can be install outside Kit6: Suitable for frameless glass door. Need U bracket. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + U bracket + Exit button + 10pcs Keyfobs If your door is frameless glass door, then will need a U bracket Size of U Bracket: 130* 33 * 26mm (L/W/H) Kit7:Suitable for wooden, metal door. Need L bracket. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + L bracket + Exit button + 10pcs Keyfobs Look at the door from the indoor, if the door is flat or the door to door frame is less than 3cm, you need to add the L bracket. Size of L Bracket: 170* 34 * 25mm (L/W/H) Kit8: Suitable for wooden, metal, glass door. Need ZL bracket. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + ZL bracket + Exit button + 10pcs Keyfobs If your door is open from indoor, then need to add the ZL bracket. Size of L Bracket: 170*34*25mm (L/W/H) , Size of Z Bracket: 138*45*45mm (L/W/H) Kit9:Suitable for wooden, metal and glass frame door. No need bracket. Package including: Access Control keypad + Power supply + Embedded 180KG Electric Magnetic Lock + Exit button + 10pcs Keyfobs Size of the Lock: 192Lx33Wx20H(mm) Size of Armature Plate: 139Lx32x11H(mm) Holding Force: 180kg(350Lbs) Input Voltage: 12VDC Current: 12V/120mA PaymentPlease ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled. ShippingOnce we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.ReturnWe offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.

Price: 17.41 USD

Location: Shenzhen

End Time: 2024-09-03T17:27:13.000Z

Shipping Cost: 0 USD